Item # 14352ZP BRAND: EverCoat

Evercoat Metal Glaze Ultra 30 ounces

Evercoat Metal Glaze Ultra 30 ounces
Evercoat Metal Glaze Ultra 30 ounces
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 141.54ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$47.99
Loading...
Save for Later
Evercoat Metal Glaze Ultra 30 ounces
  • 90-Day Returns
  • Technical Support
Evercoat Metal Glaze Ultra 30 ounces

Description

METAL GLAZE Ultra is the world's best sanding polyester putty for use as a finishing coat over body filler, large panels, or small spot filling. Its unparalleled sanding qualities are a result of the patent pending EcoResin. Its unique thinner viscosity makes it ideally suited for intermixing with other Metalworks products to improve flowout. Formulated with ZNX 7 for improved adhesion. For use on Sanded Body filler, Steel, Galvanized Steel, E Coat, Aluminum, Rigid to Semi rigid Thermoset Plastics, SMC, Fiberglass (cosmetic repairs only), Cured sanded 2K primer surfacers, Sanded OEM paints.

Contents

30 fluid ounces in pump container and blue cream hardener

Accessories

13520ZP Contour Premium Body Filler, 13523 ZP Contour Sprayable Polyester Filler, 50240ZP Eastwood Urethane Primer, 51136 Eastwood Color Chart, 12846Z Aerosol Injected Cleaner, 13919 Body Filler Spreaders, 14292 Spraing Steel Body Filler Spreaders, 31273 Quick Mix Board

Application Tips

Clean and degrease with Eastwood PRE. Use 80 to 180 grit to remove or scuff the paint and featheredge. Place the desired amount of material on a clean, non fibrous surface. Measure hardener 2% by weight Mix thoroughly until uniform color is achieved. Spread a thin layer of mixed material over surface using firm pressure. Apply additional layers if desired. Do not apply over new or uncured coatings. Avoid thick heavy applications. Finish with 180 grit, final sand with 180 grit followed by 220 to 320 grit if desired.

Safety Information

Always wear eye skin and respiratory protection when using this product. use in a well ventilated area. VOC content 1.67 LBS/Gallon

Customer Reviews

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 11.6ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

Questions & Answers

What’s the set time for this product?

Asked by: 93Shelby
Generally with proper hardner mix ratio's you'll lget a 2-3 min working time and about 10-15 till cured to sand.
Answered by: Scott C
Date published: 2020-04-29

Can this be applied DTM?

Asked by: RonWolf
You can certainly apply this filler DTM.
Answered by: Scott C
Date published: 2021-05-11

Why not 1K primer, I know they say 2K is better, but I don't know what makes it better.

Asked by: trigger
2K stands for 2 components. It is a product that requires a catalyst/ activator. These coating will always give you greater durability and adhesion in comparison to 1K coatings.
Answered by: Kelly H
Date published: 2021-05-11

can you use evercoat metal glae ultra after primer

Asked by: gus1
This filler can be placed over Cured sanded 2K primer surfacers and Sanded OEM paints.
Answered by: S Church
Date published: 2016-10-20
  • y_2021, m_12, d_2, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.20
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_14352ZP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 39.79ms
  • QUESTIONS, PRODUCT
We found other products you might like!
Evercoat Metal Glaze Ultra 30 ounces
$47.99
In Stock