Find Anything, Fast!

Need Support or Have a Question?

Click Here
Rust Solution Sale
  • Home
  • Eastwood Aluma Blast Paint Aerosol 12 oz
Eastwood Aluma Blast Paint Aerosol 12 oz is rated 4.4 out of 5 by 41.
Rated 5 out of 5 by from Good Stuff But..... This is good stuff but by the time u get it to your's 19.25 for a can...OUCH
Date published: 2018-12-04
Rated 5 out of 5 by from Very nice product In truth, I liked the original formulation better but this is still a good product. Seems to me the original formula (I'm talking about the late 90's) was thinner and dried to a light silver, matte finish. Then the product seemed to get thicker and had a greenish tint to it. This latest batch seems thinner than the last cans I bought and the color seems more like natural aluminum. So it's pretty close but I still wish the original formulation was available. Probably had to change with stricter environmental laws.
Date published: 2018-07-09
Rated 5 out of 5 by from Great Stuff Painted oil pan, A/C & alternator brackets. These things were pretty nasty and now look like new. Key is to follow the instructions. Cleaned then used aluminum prep, light sanding and clean & prep again. I've never had great luck painting from a can but this stuff lays down so even. Used 3 light coats on each and turned out beautiful. Really sets off the engine rebuild.
Date published: 2018-06-14
  • y_2019, m_2, d_17, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_41
  • loc_en_US, sid_10109Z, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

I love Aluma Blast, and wondered if it will adhere to Rust Encapsulator?  I'd like to prep & painting the somewhat corroded bolt heads with Rust Encapsulator prior to spraying the whole engine/transmission with Aluma Blast.

Asked by: Craig
Rust Encapsulator will be a perfect base for our Alum blast to be applied over.
Answered by: Scott C
Date published: 2018-10-23

Can you clear over this product.

Asked by: Rick
A clear is not needed on top of this coating-but the Diamond Clear could be applied over top if you would like.
Answered by: Kelly H
Date published: 2018-10-21

Will alumablast stick to chrome?

Asked by: CK2000
This product will stick to chrome as long as the surface is sanded properly.
Answered by: SeanW
Date published: 2018-09-05

It states that Aluma blast is good for up to 300 deg, but since Eastwood recommends using Self Etching Primer to prep, that product is only spec'd at 170 degrees. I plan on using the Aluma on my TPI upper intake. Will the primer work?

Asked by: JoeC
Aluma blast can also be used Direct To Metal in this case which will allow you to still used the 300F heat resistance.
Answered by: Scott C
Date published: 2018-10-21

I know a self etching primer works best, but would Eastwood Rust Encapsulator work too for a steel transmission pan?

Asked by: LittleBit
Rust Encapsulator will be a great primer as well.
Answered by: Scott C
Date published: 2018-10-21

Can i paint aluminum cylinder heads with this paint

Asked by: Nicolae
As long as the part will not see more than 300F you would be perfectly fine to use this paint in that application.
Answered by: Scott C
Date published: 2018-06-05

Why doesn't this product ship free when other Eastwood aerosol products, such as Rust Encapsulator or PRE, ship free?

Asked by: Chris
It is best to contact our Customer solutions department regarding any shipping questions for the most up to date info. They can be reached at 1800 343-9353 or
Answered by: Scott C
Date published: 2018-05-16

Can you use a non lacquer based self etch primer or acid etch under the aluma blast paint?

Asked by: Edward 72
You can certainly use a self etching primer under our Aluma blast.
Answered by: Scott C
Date published: 2018-03-23
  • y_2019, m_2, d_17, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.11
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_10109Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Aluma Blast Paint Aerosol 12 oz

Eastwood Aluma Blast Paint Aerosol 12 oz

Item #10109Z

Spray-on a protective,
durable, aluminum-look finish
Quantity: close

In stock

Only $14.99


< Back


Spray-on a protective, durable, aluminum-look finish with AlumaBlastâ„¢ Paint.

  • Protects up to 300 degreesF
  • Acrylic lacquer with low 4-15% gloss
  • Aerosol can covers 6 sq. ft.

Eastwood Aluma Blast Paint is specially formulated to duplicate the original look of cast aluminum car parts. Protected up to 300 degrees F by this paint, metal parts will keep that brand new look for a long time. Available only in aerosols. One aerosol covers 6 sq.ft., acrylic lacquer, natural low 4-15% gloss. Great on intake manifolds and transmission housings.

More info...
< Back


(1) 12 ounce aerosol Eastwood Aluma Blast


One aerosol can covers 6 sq. ft.
Maximum Temperature: 300 degrees F.


Made in the USA. 90 Day Eastwood Warranty.


Apply 2 medium coats for best results. We recommend PRE Painting Prep (10041Z) to remove oil. Aluma Blast can be applied directly to bare metal surfaces. Aluma Blast is an Acrylic Lacquer that withstands up to 300 degrees F Each can covers 6 sq ft. For better durability, use our Self Etching Primer (16014Z) Aerosol, or (16009ZP) Quart. Use these products in a well ventilated area, or wear a respirator.

Click here for product SDS information

Attention California Residents - Proposition 65

Proposition 65 Warning WARNING - Cancer and Reproductive Harm -

< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: