Hotcoat Powder Coat Candy Raspberry
- 90-Day Returns
- Technical Support
Create a glossy candy raspberry finish over chromed, polished or chrome powdered parts. Do The Job Right with Eastwood Powders!
- Provides extremely durable finish
- Contains no environmentally harmful solvents
- 100% Virgin powder
- Impact resistant and flexibility
- Good chemical resistance
Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
Note: split images - right side is over chrome, polished metal, Argent Silver Base Coat, or Reflective Chrome, left side is over bare metal, 10303 Rally Wheel Silver, and 51082 OEM Wheel Sparkle Silver.
Color: Candy Raspberry
Gloss Level: Gloss
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.
1 Pound powders are packaged in plastic Bags
COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Application Note: Final appearance of Translucent and Candy powders will be affected by applied powder thickness, substrate and application techniques.
Questions & Answers
I have 4 Police car (Ford) 15 inch rims that I wont to coat with Extreme Chrome powder and then recoat with Powder Candy Raspberry. How much powder do I need? Front wheels are stock. Rear have been widened to 11 1/2 inches.I have 1 lb each.