Item # 11869 Hotcoat Powder Flat Black BRAND: Eastwood

Eastwood HotCoat® Flat Black Powder Coat

This smooth, custom flat black finish provides a durable, great looking finish.

Eastwood HotCoat® Flat Black Powder Coat is rated 3.8 out of 5 by 10.

Grouped product items
Product Name	Qty
Eastwood HotCoat® Powder Coat Flat Black - 8oz	In Stock $9.99
Eastwood HotCoat® Powder Coat Flat Black - 1lb	In Stock $14.99
Eastwood HotCoat® Powder Coat Flat Black - 25lb	Made-to-Order $238.99

Starting at$9.99

Save for Later

This smooth, custom flat black finish provides a durable, great looking finish.

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

• 90 Day Returns
• Lifetime Tech Support

Eastwood HotCoat® Flat Black Powder Coat

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Overview:

Description

This smooth, custom flat black finish provides a durable, great looking finish. Do The Job Right with Eastwood Powders!

Provides extremely durable finish
Contains no environmentally harmful solvents
100% Virgin powder
Impact resistant and flexibility
Good chemical resistance

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

This epoxy powder offers superior chemical resistance. Perfect for numerous under the hood or under the car parts. Avoid parts in direct sun light.

Warranty

Eastwood 100% satisfaction guarantee

Specifications

Color: Black
Gloss Level: Flat
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Epoxy
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.

In the Box

8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags

Guides & Accessories

Safety Information

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Application Tips

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Reviews

Rated 5 out of 5 by Bob B from Eastwood products I have used the Eastwood products for several years with great results. The flat black covers well and give the desired finish.

Date published: 2024-02-19

Rated 5 out of 5 by Calimecroc from Black Flat Powder is PERFECT It took a bit of time to me to got the results I want with the Powder Coating thing. I was also hesitating with the flat black powder regarding the 2 negative comment I saw. But honestly, the powder is just perfect!!! Here is the technics I used: -clean the aluminium parts with sand paper or metallic brush (brass one!). -then I washed the parts under clear water with dish soap. -rince well the parts and do not dry it with anything!!! -attach the parts to the hanging wire using powder free gloves. -then place the parts in the oven at 200 Deg C for 20min. -install a dryer on the pressure air hose, setup at 2 bars maximum. -fill the gun tank with powder, I usually load 1/3 of the tank. -when the parts are hot, put them out of the oven, hang them outside and apply a thin coat of the powder. Usually, I do two pass everywhere! -the fact that the parts are hot enough to start the curing process, the powder start to melt right away and do not escape the parts due to wind or Faraday effect. -then put them back to the oven for 20 min ;-) -Do not touch the parts at the end of the cooking time before they are cold enough, otherwise, you will have non desirable marks. Then your parts have pro looking. My process works for me, I hope it will help those who didn't like this powder yet. So the powder is perfect, the process is usually the issue. Find yours and you will be more than happy with this powder.

Date published: 2023-08-01

Rated 5 out of 5 by Tommy from Beginners dream. Beginner dream. Easy to use even for beginners.

Date published: 2022-05-12

Rated 5 out of 5 by FR Racing from Nice smooth look. Used this on racecar parts and even a sink drain, really like the looks of it.

Date published: 2022-01-07

Rated 2 out of 5 by T Joy from Not flat black The "Flat Black" powder is not flat. It has considerable sheen. I would say it is more like a semi-gloss. But it goes on well and looks great if you want a glossier finish.

Date published: 2024-03-22

Rated 1 out of 5 by Rich from Powder coating Awfully thin product hard to cover with any kind of sickness I have to do it two or three stages.

Date published: 2021-08-18