Add the final touch to your hot rod, custom roadster or muscle car using Eastwood Violet Powder Coat. Our HotCoat powders provide an extremely durable high-gloss finish that protects against rust and corrosion. The light violet color gives your project car a stable energy that also invokes feelings of nostalgia — perfect for restorations that you want to make your own. It’s a perfect complement to bright yellow and white primary coatings when accenting the suspension, engine bay or trunk. Our Powder Coating FAQ has more on what parts you can and can’t (or shouldn’t) powder coat.
When it comes to metal finishing, Eastwood powders are far superior to liquid coatings. All powders are formulated from the highest quality materials, producing an extremely durable finish that is chip-, chemical- and fuel-resistant. Our powders are also durable enough for under-hood applications with heat resistance up to 250 degrees Fahrenheit. They can be used on any metal surface, and in most cases, they cure at a temperature of 400 degrees Fahrenheit for 20 minutes after flow-out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
Use light purple powder coat from Eastwood and Do the Job Right from your own shop. We’ve been a DIY leader since 1978 with high-quality products and lifetime tech support from automotive experts. Visit our How-to Center for more about powder coating tools, supplies and techniques.Features:
- Provides extremely durable finish
- Contains no environmentally harmful solvents
- 100% Virgin powder
- Impact resistant and flexibility
- Good chemical resistance
8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags
Color: Light Violet
Gloss Level: Gloss
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.
COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov