Make a bold statement every time you go driving with parts coated in HotCoat Machine Gray. This affordable coating provides a glossy warm gray finish similar to what was commonly used on machines & equipment. Our Nardo Gray powder coat closely replicates the iconic Audi color which is menacing without being showy — just like a World War 2 battleship or industrial compressor.
Eastwood powders are far superior to liquid coatings for both accenting and bodywork. They provide an extremely durable finish that is chip-resistant. All powders are formulated from the highest quality materials that are chemical- and fuel-resistant. They are suitable for any metal surface and cure at a temperature of 400 degrees Fahrenheit for 20 minutes after flow-out. Our powders are also durable enough for under-hood applications since they are heat-resistant up to 250 degrees Fahrenheit. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
Use this powder gray finish to convey power and authority in a color-fast coating that protects sheet metal, steel, stainless or aluminum. We offer several quantities of ash gray powder coating so you can apply it to steering wheels, trunks, shift knobs and much more. Eastwood HotCoat powder comes with a 100% customer satisfaction guarantee and free 24/7 support from the Eastwood Garage Eastwood Garage to help you Do the Job Right.Features:
- Provides extremely durable finish
- Contains no environmentally harmful solvents
- 100% Virgin powder
- Impact resistant and flexibility
- Good chemical resistance
Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. Eastwood Powders are durable enough for under hood applications and heat resistant up to 250 degrees F. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.
8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags
Color: Machine Gray
Gloss Level: Gloss
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
RAL Number: 7042
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.
When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.
Eastwood 100% satisfaction guarantee
CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.
COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.
CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.
Eastwood Offers Free Lifetime Technical Support
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Questions & Answers
You may also be interested in the following product(s)
Starting at: $8.99