• Home
  • MIG175 Standard Drive Roller

the housing for the wire feed motor is busted is there a replacement part?

Asked by: larry
We have a new drive motor faceplate available. A quick call to our Customer solutions team can get you one of these.
Answered by: Scott C
Date published: 2018-03-12

You sell two drive wheels for the MIG175 model #12012. The drive wheel listed here and knurled roller #20438. Why the difference and do I need both to have an on hand spare?

Asked by: Hankus
The knurled version is for when you want to run a lot of flux core wire. The other is just the standard in case you loose your original.
Answered by: S Church
Date published: 2018-01-30

This MIG175 Standard Drive Roller 0.023" 0.030" can be use on flux cored wire?

Asked by: Clinton Snow
Technically, you can run flux wire on these standard drive rollers. However it is preferred by most and highly recommended to use a knurled drive roller for this application instead.
Answered by: KHoffnagle
Date published: 2017-06-01

what are the od, id and thickness dimensions? thanks

Asked by: rlc3
OD=30mm ID=10mm Thickness= 11.8mm
Answered by: S Church
Date published: 2017-02-26

Would this work with the mig/stick 200?

Asked by: Mentz
The drive wheel for the MIG 175 is too big and narrow for the MIG 200. The drive wheel that will work on the MIG 200 is the MIG 135 Allen key drive wheel. It is the same diameter and thickness.
Answered by: Ed O 88
Date published: 2014-12-24
  • y_2018, m_4, d_18, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_12239, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

MIG175 Standard Drive Roller

Item #12239 Brand: Eastwood

Replacement drive roller for our MIG 175 Welder #12012

In stock

Only $7.99

Details

Replacement drive roller for the MIG 175 (12012). This would be utilized if the original drive roller is damaged.

More info...

About MIG175 Standard Drive Roller

Drive roller size specifications

  • OD-30mm
  • ID-10mm
  • Thickness-11.8mm

  • Contents

    Contains one drive roller with the 0.023" and 0.030" groove cut


    Application

    Use to replace original drive roller in the Mig 175


    FAQ's

    Use to replace original drive roller in the Mig 175


    Customer Reviews

    Questions & Answers

    Customers also viewed: