FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email projectadvisors@eastwood.com.
OptiFlow Roller and Tray Kit gives you everything you need to roll on OptiFlow Epoxy Primer and OptiFlow Urethane Primer - trays, liners, two sizes of roller frames and rollers - everything to do the job right. Please remember, you will not get the same great results from standard hardware store rollers or regular primers that are designed to be used with a paint gun. The OptiFlow Roll-On Primer System includes specially formulated primers to be used with these specific rollers.
Don't forget our Made in the USA OptiFlow Epoxy Primer (23130ZP) which is perfect over bare metal, primers, bodyfillers and existing finishes. Plus it's designed to work with the OptiFlow Roller Kit.
To get the body perfectly straight, you will want to apply our OptiFlow Urethane Primer (23132ZP) which is perfect over OptiFlow Epoxy Primer and bodyfiller to sand and get your project laser straight. This primer is also Made in the USA and designed to work with the OptiFlow Roller Kit.
Incredible Results with OptiFlow
What's Included
(1) Large, 7” Roller Frame
(1) Small, 6” Roller Frame
(4) 2-Packs, Large 7” Foam Roller Covers (total 8 pcs)
(2) 2-Packs, Small 6” Foam Roller Covers (total 4 pcs)
Rated 5 out of
5 by
Tony from
So EasyI am a DIY person. I could not believe how easy it was to apply the Epoxy primer and Urethane primer with a roller. More importantly I was pleasantly surprised how great it looked. Made it so easy for preping for the base coat.
Date published: 2025-04-21
Rated 5 out of
5 by
CWJJ from
Roll-On PrimerI love it. I only wish they had roll on top coat as well. I used the black and the gray and they both had a lot longer pot life than was described which I actually liked. It gave me a bit more working time
Date published: 2025-04-09
Rated 5 out of
5 by
Scott B from
OptiFlow on a CorvetteI am using the OptiFlow primer system for the first time on my 1970 Corvette. The kit is and primer are very easy to use and it covers great.
Date published: 2025-01-26
Rated 5 out of
5 by
CWJJ from
Wood ApplicationI used it on plywood, on top of a fully cured epoxy layer. It worked very well.
Date published: 2024-12-10
Rated 5 out of
5 by
Chevybel53 from
I should have done it sooner!!!Very good quality!!! I have no experience and my car looks amazing… primer grabs and lays very smooth. I am very happy I decided to go this route. They answered and helped me with all my questions and issues I had… I highly recommend this product.
Date published: 2024-10-08
Rated 5 out of
5 by
Mark R from
Love this high build primer!I built plugs and created fender flares for my 1964 Corvette. My wife is very sensitive to chemicals and I can’t spray primer in my garage. No worries as this Optiflow Epoxy primer is high quality, easy to use, and lays down flat. Once I finish the rear fenders, I’ll block the entire car and roll on the Urethane primer.
How can one use the opti-flow primer on tight area like on the Cervini's C-Series Front Bumper for an 06 Mustang GT?
Asked by: Navysniper7
You would pick up a can or two of our Eastwood 2K AeroSpray Epoxy Primer- Gray item # 14149Z for tighter areas.
Answered by: Wil Tech Support
Date published: 2025-05-12
How soon can brush on seam sealer be applied after applying Optiflow epoxy primer?
Asked by: Elmo
Full cure of the Eastwood Epoxy OptiFlow primer is 5 days. So anytime after that full cure would be best.
Answered by: Wil Tech Support
Date published: 2025-05-06
would it be recommended to seal raw fiberglass?? Corvette repairs
Asked by: will
Epoxy is an excellent choice. Yes, epoxy primer is generally considered a good choice for Corvette bodies and sealing.
Answered by: Bill G Tech Advisor
Date published: 2025-05-02
How long can I leave this before topcoating
Asked by: Davey
As long as you'd like, but after 4 days you'll need to scuff with 320 and 400 grit sandpaper to top coat over it.
Answered by: Max S
Date published: 2025-04-29
What is the shelf life of the product once opened? Considering it will be store above freezing and in a cool place as well.
Asked by: Patrick B
Once opened, the shelf life of the Eastwood OptiFlow Epoxy Primer Quart and Catalyst Kit is approximately 9 months to 1 year, provided it is stored in a cool, dry place above freezing and the containers are sealed tightly
Answered by: Greg A Tech Advisor
Date published: 2025-04-07
What grit should I use on bare metal BEFORE the primer? thanks!
Asked by: AluminoidMustang
Before applying the Eastwood OptiFlow Epoxy Primer Gallon and Catalyst Kit, you should prep the bare metal by sanding it with 120 and 180 grit abrasive paper. This ensures proper adhesion of the primer to the surface
Answered by: Greg A Tech Advisor
Date published: 2025-04-07
What temperature can it be applied
Asked by: Dale
The working temperature for the Eastwood OptiFlow Epoxy Primer is specified as 18-25°C (64-77°F) for application and curing