Eastwood garage - How To 
Email Sign-up
- Home
- Pinch Weld Clamps
Pinch Weld Clamps is rated
out of
5 by
7.
Rated 5 out of
5
by
Fusion Man from
Gator Grip
I purchased the Pinch Weld clams for those difficult to reach areas that require a strong clamping force for alignment. These are the handiest clamps and should be in every toolbox!
Date published: 2017-11-01
Rated 5 out of
5
by
Arney from
Small & Effective
Opportunity to use them on the first day I received them. Tight location to weld a wheel well patch effectively. Seems like these will be a winner for welding tasks to come.
Date published: 2015-06-07
Rated 5 out of
5
by
Flynavy from
Alternate Use...
I purchased these clamps for a "tarp". By using these clamps on the canopy tarp, I no longer have to worry about the wind taking it. The clamps hold really tight and I didn't have to punch holes in the trap. The female threads in the caps are perfect to put in SAE eye bolts, to add hand lines to the hold down weights. Thanks "Eastwood", great item
Date published: 2015-02-09
does the 1/2'' capacity means that the jaw can open up to 1/2 an inch? I have something that is about 7mm thick that I need to clamp down and was wondering if this would be able to do it.
Half inch is the maximum the jaws will open up to accept material.
Date published: 2018-06-11
I am a Tool Designer at Textron Aviation in Wichita Kansas. I am needing to put your Pinch Weld Clamp in a Tool Design I am working on, do you have a CAD model of this that you could send me? I am using Catia V6 and .stp or .step format is best for us.
Unfortunately we do not have any CAD models of any of our products to send out.
Date published: 2018-04-16
I'm curious about these miniature pinch clamps. It looks like the knob makes the opening adjustable. I need to securely hold a small glass tube, only .148" (that's 3.76 mm) diameter (slightly larger than 9/64"). Can I adjust the clamp to that diameter?
Unfortunately, these clamps would not be applicable for you application..
Date published: 2016-03-30
Pinch Weld Clamps
Pinch Weld Clamps
Item #13525 Brand: Eastwood
Hold pieces tightly together for pinch welds, flange welds, and more
< Back
Details
Pinch Weld Clamps hold in tight spaces where larger clamps won’t fit
Trying to weld in tight spots but your clamps won't fit? Get this miniature 4-pc. Pinch Weld Clamp Set instead. Holds outer panels to inner heel lips, rockers, trunk well opening, custom dash or door panel fabrication, outer door skins, and more.
More info... - 250 lbs. of clamping force
- 1/2" capacity
- For pinch welds, flange welds and other uses in home and shop
- Holds sheet metal to the edge of a welding table
< Back
About Pinch Weld Clamps
Handy welding clamps can be used to tightly hold workpieces together for welding, even in constricted work areas. Imported.
Contents
1 set of 4 Pinch Weld Clamps
Accessories
19016 - Intergrip Panel Clamps
Application
Welding, Clamping
Safety
Always use caution when removing after welding since the clamps may still be hot.
Warranty
1-year warranty.
< Back
Customer Reviews
< Back
Questions & Answers
Customers also viewed:
-
Stops most hot spatter from burning nearby materials during weldingOnly $48.99
▲
Top of page