DO THE JOB RIGHT.
Details
Nozzles for the Pressure Blasters requiring 15 CFM @ 80 PSI 1/8"
About Pressure Blaster Ceramic Nozzle 1/8in
Nozzles for the Pressure Blasters requiring 15 CFM @ 80 PSI 1/8"
Application
The 1/8" Ceramic Nozzle allows you to run your pressure blaster on only 15 cfm at 80 psi (approx. 5 HP compressor). As the nozzle wears, it requires more air and eventually, usually after 6 hrs use, requires replacement if your compressor output is limited. Larger nozzles require more air but work faster.
Safety
WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, & body protection must be worn during use. Inhalation of silica particles can cause cancer & other deadly diseases. Wear NIOSH- approved respiratory protection during operation
Eastwood Offers Free Lifetime Technical Support
Click here for product SDS information
Attention California Residents - Proposition 65
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
