
Details
About Pressure Blaster Ceramic Nozzle 3/32in
Replacement nozzles for the pressure blaster require 7 CFM's @80 PSI 3/32"
Contents
The 3/32" ceramic nozzle allows you to run your pressure blaster on only 7 cfm at 80 psi (approx. 2 H.P. compressor).
Application
As the nozzle wears it requires more air and eventually, usually after 6 hr. use, requires replacement if your compressor output is limited. Larger nozzles require more air but work faster.
Safety
WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, & body protection must be worn during use. Inhalation of silica particles can cause cancer & other deadly diseases. Wear NIOSH- approved respiratory protection during operation
Eastwood Offers Free Lifetime Technical Support
Click here for product SDS information
Attention California Residents - Proposition 65
