Item #
22016
BRAND: Eastwood
Pressure Blaster Ceramic Nozzle 1/4in
For pressure blasters<br>requiring 80 cfm @ 80 psi
For pressure blasters<br>requiring 80 cfm @ 80 psi
Pressure Blaster Ceramic Nozzle 1/4in is rated
out of
5 by
4.
For pressure blasters
requiring 80 cfm @ 80 psi
requiring 80 cfm @ 80 psi
Loading...
- 90-Day Returns
- Technical Support
- In Stock
Frequently Bought Together
Total Price
Description
Nozzles for the Pressure Blasters requiring 80 CFM @ 80 PSI 1/4"
Contents
Pink Color
Accessories
Eastwood 1/4 in. Pressure Blaster Large Tapered Ceramic Cone Nozzle For Media Blasting Guns Medium Replacement
Application Tips
The 1/4" ceramic nozzle allows you to run your blaster on 80 cfm at 80 psi. As the nozzle wears it requires more air and eventually, usually after 6 hrs use, requires replacement if your compressor output is limited. Larger nozzles require more air but work faster.
Safety Information
WARNING: Blasting emits abrasive under pressure. Adequate respiratory, eye, & body protection must be worn during use. Inhalation of silica particles can cause cancer & other deadly diseases. Wear NIOSH- approved respiratory protection during operation
Customer Reviews
Rated 5 out of
5
by
Redd from
Good product...more info. needed
I agree with the other reviewer, this product is of good quality and does what it is supposed to do, however I also had to go to the Black Beauty website to get the proper info. for selecting the right sized nozzle. A little more info. on the Eastwood website would have been nice. Good product and easy to make the purchase on the website.
Date published: 2015-06-19
Rated 5 out of
5
by
Anonymous from
Good, but what size.
Good, but I had to go to the black beauty website to find the correct size for the grit I was using. I finally got it right the third time. Please list the right size nozzle for the different grits of sand
Date published: 2014-01-21
Rated 1 out of
5
by
Layne from
Very soft.
Ordered ten, and good thing. After about an hour the hole was so big that my compressor couldn't keep up.
Date published: 2016-07-31
Questions & Answers
what size nozzle is best used for your Walnut shell media using your pressure blaster with deadman valve?
The minimum size recommend for 22018 Walnut Shells is the ¼” Nozzle size.
Date published: 2020-05-21
Which blast gun housing or brass nozzle end should I use for this ceramic tip?
These are for use with this Deadman blasting option: https://www.eastwood.com/deadman-valve-for-blaster.html. Which is used on all of our Pressure Abrasive Blaster.
Date published: 2019-12-30
What grit of sand should I be using for an 1/8 inch nozzle?
Abrasive media size used is not affected by your choice of nozzle. The media should be selected for the job you're working on (what you need to accomplish - stripping rust, paint, etc.). Nozzle size is more directly related to air volume, as moving up in nozzle size will have a great effect on how much air you'll need to supply the blaster in order to do the work.
Date published: 2018-04-11
How many nozzles come in the pack ?
They are sold individually
Date published: 2018-04-07
Pressure Blaster Ceramic Nozzle 3/16" Item #22015. What is the OD at each end? overall length?
Hello Deno,
The top of the ceramic nozzle is 11/16 the bottom is 1 1/8 and the over all length is 3 3/4.
Date published: 2019-09-19
Pressure Blaster Ceramic Nozzle 1/4in
Retrieving Price...
In Stock