- 1 HP Jet Grinder with Multitool Attachment and Sanding Belts
1 HP Jet Grinder with Multitool Attachment and Sanding Belts
Item #21497 Brand: Multitool
This item ships directly from the manufacturer and is not available for store pickup.
The Multitool Pro Kit offers a 2 x 36 inch Multitool attachment assembled on a 1 hp JET Grinder and includes a Belt & Disc starter kit.
- 1 HP Jet Grinder
- 2 Inch x 36 Inch Abrasive Belt
- 7 Inch disc
- Quick change belt
- Automatic Tensioning
- Quick Track Adjustment
- 4 areas of abrasive contact – Flat Platen, Contact Wheel, Slack Belt and 7” Abrasive Disk
Perfect tool for all of the following tasks.
This versatile tool allows you to remove material up to 5 times faster than with the equivalent grit grinding wheel. The unit offers 5 grinding areas in one machine with four work surfaces on the Multitool itself. The majority of work is generally performed on the front contact wheel, but the unit also offers flat platen grinding, slack-belt grinding, disc grinding, and stone wheel grinding. Belts change in seconds from grinding, to sand, deburr, or polish. A variety of abrasive and polishing belts as well as discs are included to get the job done right.
(1) 8" JET Grinder with Multitool Attachment Assembled
(1) Four Bar Buffing Compound Set
(1) Talc (3M) Polishing Belt
(1) 40 Grit Aluminum Zirconia Belt
(1) 80 Grit Aluminum Zirconia Belt
(1) 120 Grit Aluminum Zirconia Belt
(1) 220 Grit Aluminum Zirconia Belt
(1) 400 Grit Aluminum Zirconia Belt
(1) 1200 Grit Aluminum Zirconia Belt
(1) 40 Grit Peel/Stick 7" DISC
(1) 80 Grit Peel/Stick 7" DISC
(1) 150 Grit Peel/Stick 7" DISC
Motor: 1 hp
Belt Width (inches): 2
Belt Length (inches): 36
Belt Speed: 5400 feet per minute
Contact Wheel Diameter (inches): 3.5
Platen Size (inches): 2 x 5.875
Disc Size (inches): 7
Disc Speed (rpm): 3450
Weight (pounds): 52
Dimensions (LxWxH): 20 x 20 x 12
Always wear ANSI approved ear, eye, and hand safety equipment when using this type of tool.
Click here to see safety products
Questions & Answers