Cart is Empty

View

Eastwood Digital Torque Wrenches and Adaptors

Eastwood Pneumatic Tools - Impact Wrench, Metal Sheers, Metal Saw

Recently Viewed Items

Blast Media Walnut Shells 50 lb
Item #22018
Blast Media Silicon Carbide 50 lb
Item #22019
Blast Media Glass Bead 50 lb
Item #22023

Community Poll

ABOUT SSL CERTIFICATES

Home /
Blast Out of a Bucket Abrasive Gun

Blast Out of a Bucket Abrasive Gun

Enlarge product image

Blast Out of a Bucket Abrasive Gun

Item #22009 A

In Stock - Ready to Ship Today

Only $29.99

"Blasting for beginners" starts with this "Blast-out-of-a-Bucket" Abrasive Gun Kit!

If you're a beginning blaster on a tight budget, or you just don't need to blast that often, this is the kit for you.

Connect this blasting gun to your compressor
Drop the pickup tube and hose into your bucket of abrasive media
Pull the trigger to blast!

9 Review(s) | Add Your Review

Add Items to Cart Qty:

About Blast Out of a Bucket Abrasive Gun

Just connect the blasting gun to your compressor (7 cfm at 80 psi), put on appropriate protection, and place the pickup tube and hose in a container of blast media. The suction head will draw the abrasive grit from the bucket into the air stream to minimize surging or skipping, then blast it out. Trigger control lets you blast when and where you want. Imported.

Heavy-duty die-cast gun includes 3 steel nozzles for small compressors.

Blasting Gun
2 small 13/64" nozzles (requires 7 CFM at 80 PSI)
2 medium 1/4" nozzles (requires 15 CFM at 80 PSI)
Air Jet
Key Wrench

Be sure to wear all appropriate safety equipment.

Customer Reviews

(Posted on 12/31/11) It works well
Review by Chip

Quality
Price
Value

Set up was easy, thanks dish washing lubrication.Flowed Black diamond right out of the bag , no problems. The only short coming was mine. I knew I did not have compressor enough, and was able to use it 30 to 40 seconds at a time to let recovery of the compressor come up. The media cut the nearly century old paint layers off of the cast iron finials very well with minimal set up and protection. I must tell you that the 'new' paint came off a heck of a lot better than the original paint did. They really knew how to brew paint in the old days.ch

(Posted on 11/10/11) Great for the beginner or those on a tight budget
Review by Lawrence

Quality
Price
Value

Item works as described and performs excellently. Cant beat the price. Great for the beginner of user on a tight budget. A note about the hose....It works just fine. Dont let negative comments about the hose discourage you. Brains over brawn. Tip* simply mix a little liquid dish soap and water, apply a small amount to the part of the gun and the pickup tube where the hose will attach, and simply push it on easily all the way up for a snug fit.

(Posted on 9/13/11) Decent - Especially for the price
Review by Alexander

Value
Quality
Price

Unit seems well made except for the ten foot pickup hose. Tried to push hose onto gun and pickup tube. Hose split. Warmed the hose with water, tried again, same result. Replaced the hose with a piece of tubing from hardware store ($4). Have used it with soda and play sand (not recommended due to dangerous dust). Seems to work fine, occasional clogs with the sand, maybe due to sand not being 100% dry. Overall, thumbs-up except for the pickup hose.

(Posted on 9/13/11) Decent - Especially for the Price
Review by Alex

Value
Quality
Price

Unit seems reasonably well made for the price. The ten foot pickup hose was junk - when I tried to push it onto the gun and the tube, it just split. Warmed the tube with hot water, tried again. Same result. Replaced the hose with a piece of tubing from my hardware store ($4). Have used it for soda media and play sand (not recommended because of the dangerous dust). Seems to work fine, some issues with stoppage with the sand, may be due to the sand not being completely dry. Overall, thumbs-up except for the pickup hose.

(Posted on 10/23/10) Great
Review by Tommy