• Home
  • EW 2K Aerosol High Gloss Clear
EW 2K Aerosol High Gloss Clear is rated 4.4 out of 5 by 59.
Rated 5 out of 5 by from The best you can get in an Aerosol can I recently saw a video on how to get professional results from a rattle can online. This was a professional auto painter, and he was just trying to help us consumers save some time and money. Although he had never tried this method before his results were similar to his shop work with an air gun. One of his main emphases was to use a 2 part Clear. Well, I took his advice and went with Eastwood high gloss clear to finish my factory Saab wheels. After a good sanding with 320 I used a filler primer to cover any low areas (deep scratches) that needed attention. I used a metallic paint from rust-oleum, and Eastwood's 2K Aero-Spray high gloss clear with amazing results.
Date published: 2015-01-15
Rated 5 out of 5 by from Best clear in a can! This is the best option if you can't spray clear coat from a spray gun. Spray gun will be a cost savings over time but I just don't have the space right now and this saves me money from taking my masks to a body shop for clear coat. you do have to use the can up pretty quickly but I just wait and do two masks at once. I have been able to push the pot time but putting the can in a zip lock bag in the fridge. not sure if the company would condone that practice. I do love the Eastwood 2K clear, even over SprayMaxx. Eastwood costs less and I feel like it flows a little better. Not sure why but it is at least the same as the other brand so you might as well buy the cheaper option.
Date published: 2014-12-12
Rated 4 out of 5 by from Good stuff for intelligent people I painted the entirety of my 68 Mustang using rattle can Rustoleum spray paint. For the finishing clear coat i used this clear coat. As a general i applied 4 coats: 2 light, 2 moderate. I would also recommend after the 2 minute pre-puncture and puncture of the red button to use 2 strips of tape on the bottom of the can to hold the button in. Doing this will keep the center tube from being closed and will keep the pressure longer to the end of the can. After going through 15 cans of this stuff, i would say its rather pricy in comparison to the $5.00 automotive clear coat. The spray patter can be changed and it fans out great. This makes it very easy to do the over lap when applying the clear coat. Great design, seems like a great product, but the price... terribly expensive for a bottle of clear coat that doesn't coat as much as other cans of clear coat that have the same volume. Lastly, use your head there is a pot life on this so whatever project you are doing have your project prepped, prep work done, conditions ideal. Take your time with light coats first so you don't get orange peel or wrinkles in your clear coat. Its the last stage.
Date published: 2014-03-08
  • y_2017, m_4, d_23, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_59
  • loc_en_US, sid_14148Z, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Looking to paint my motorcycle tank but given that it will require a minimal amount of paint will this work as a top coat and will this be resistant to occasional gas spills on the tank? 

Asked by: Jnm12
Since this is a catalyzed paint it would be very fuel resistant.
Answered by: S Church
Date published: 2017-04-06

Painted my trunk with spatter paint and looking for a matte clear. Will this work??

Asked by: Swinter
This clear will be fine over top of our Trunk paint.
Answered by: S Church
Date published: 2017-03-23

Can this be used on an aluminum intake manifold? Will it survive the engine heat?

Asked by: Johnnyfixit
This product is only thermally stable to 200F.
Answered by: S Church
Date published: 2017-03-13

How well will this hold up if used on the aluminum wheel barrels? Will it hold up to road grime and brake dust ? Already have barrels cleaned, primed with acid etch primer. Argent silver color coat will be sprayed on and looking to use this stuff.

Asked by: Lou Mo
This should not be applied over top of non catalyzed paints so as to minimize chance of reaction.
Answered by: S Church
Date published: 2017-03-08

I have some 1K acrylic enamel to spray a truck fender. Can I use this 2k gloss clear to cover that without any issues? Thanks

Asked by: muzzy
The 2K clear may react with the 1K paint since it is not catalyzed.
Answered by: S Church
Date published: 2017-04-13

Can this be used as a top coat over your alum blast paint ?

Asked by: bandit101
This should not be applied over a non catalyzed paint like the aluma blast paint.
Answered by: S Church
Date published: 2017-02-10

Can this be used as a top finish coat for a guitar ? The guitar is stained with a blue colored water based stain. Thank you for your time... Michael...

Asked by: Mjclemm
This clear can be applied to properly prepped wood.
Answered by: S Church
Date published: 2017-01-23

Coverage per can?

Asked by: Joss
One coat will cover about 20 SQ FT.
Answered by: S Church
Date published: 2017-04-07
  • y_2017, m_4, d_24, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_72
  • loc_en_US, sid_14148Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

EW 2K Aerosol High Gloss Clear

Item #14148Z Brand: Eastwood

Precision of a 2-component coating without the paint gun

In stock

Only $24.99

Sale $19.97


Eastwood 2K High-Gloss Clear Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years.

  • 2-Component Catalyzed Technology
  • Two Chamber Design Aerosol
  • Most Durable Aerosol Epoxy Primer Available
  • Sprays Like a Paint Gun

The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an easy-to-spray aerosol.

More info...

About EW 2K Aerosol High Gloss Clear

Spray Passes: 1-2 spray passes with 50% overlap. Approx. 1.2 mil per spray pass. 3-7 minutes flash between coats, depending on temperature.
Drying: Full cure in 12 hours at 68 degrees F, 35-40 minutes at 140 degrees F (IR drying)
Pot Life: Approximately 48 hours after button is pushed and can is activated.
Ideal application conditions:Temperature between 70-85 degrees F at 50% humidity or less.


12 Ounces net weight


Eastwood PRE Painting Prep
Eastwood Chassis Kleen 18 oz Aerosol
Eastwood's 2K AeroSpray™ Epoxy Primer Gray
Eastwood Black Rust Encapsulator
Eastwood Rust Converter
Eastwood Aerosol-Injected Cleaner 11 oz
SAS Bandit Respirator

Product Info Sheets

Click Here for product info sheets


Always wear eye, skin and respiratory protection when using this product. Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings


Made in Germany using Eastwood's poprietory technology. 60 day warranty, 2 year shelf life. 48 hour pot life after activation.


Before activating, shake aerosol vigorously for 2 min. Take red button from cap. Turn aerosol by 180° and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 72 hours at 68 degrees F.

Customer Reviews

Questions & Answers

Customers also viewed: