- 2K Aerospray High Build Urethane Primer Black
Can you apply a base color coat directly on this, or does it need to be sealed first?
How does the build compare to the 2K Polyester Primer Surfacer or compared to non-2k high build primers?
Are there different colors other than grey and black?
What are the best products and techniques for painting over powder coating?
Can I paint with underhood paint over this?
can the 2k high build urethane primer be used over painted areas as well as bare metal?
can it be used direct to metal? i have a few spots with exposed metal after sanding my poly high build.
If I'm trying to paint a brand new plastic bumper from the factory, do I need this or can I just use sems adhesion promoter?
2K Aerospray High Build Urethane Primer Black
Item #14793Z Brand: Eastwood
Eastwood's 2K Aerospray High Build Urethane Primer Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years.
- 2-Component Catalyzed Technology
- Two Chamber Design Aerosol
- Most Durable Aerosol Urethane Primer Available
- Sprays Like a Paint Gun
The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols, and no mess to clean up. You'll achieve professional results from an easy-to-use aerosol.
About 2K Aerospray High Build Urethane Primer Black
Can be applied over: Painted surfaces or epoxy-primed surfaces
Surface Preparation: Abrade surface with 320-400 grit sandpaper. Clean with PRE Paint Prep.
Pot Life: Approximately 48 hours after button is pushed and can is activated.
Ideal application conditions:Temperature between 70-85 degrees F at 50% humidity or less.
11.8 ounces net weight
Always wear eye, skin and respiratory protection when using this product.Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings
Made in Germany
Before activating, shake aerosol vigorously for 1 min. Take red button from cap. Rotate aerosol 180 degrees and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 42 hours degrees F.
Questions & Answers
Customers also viewed:
2K Aerospray™ High Build Urethane Primer GrayOnly $24.99
2K Aerospray™ Matte ClearOnly $22.99
2K Aerospray™ Rat Rod Satin BlackOnly $22.99
2K Aerospray™ Epoxy Primer Black
Durability and precision of a 2-component coating, without the paint gun
Starting at: $24.99
Precision of a 2-component coating without the paint gunOnly $22.99