Eastwood USA Bright White - A bit of black tint helps shade this white just right for use on its own, or paired with another color in a two-tone combination.
Makes 1 sprayable gallon when mixed 3:1 with a required activator
Approximate coverage: 125 SQ FT
Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting
Made in the USA
This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.
In the Box
Guides & Accessories
Reviews
Rated 5 out of
5 by
Keith from
Brite white single stagePaint went on great, laid down smooth, will see how it holds up long term.
Date published: 2023-09-24
Rated 5 out of
5 by
stevesxm from
reasonable product, lousy customer servicepaint seems to be good quality altho " ready to spray" viscosity a bit thick. my prob was with the ordering / customer service. was unfamiliar with these specific products so called and ordered on phone to make SURE i ordered correctly. paint/hardener arrived correctly but primer arrived with thinner rather hardener. when i called, was told i "ordered online" so tough luck. ended up buying primer/hardener AGAIN locally and will throw away eastwood stuff and not order from these guys again.
Date published: 2023-05-25
Rated 5 out of
5 by
Todd S from
Great Product for a Backyard First Time PainterLays down very nicely. New backyard painter doing first automotive paint job. Turned out very nice.
Date published: 2022-07-31
Rated 5 out of
5 by
Chach199 from
Bright whiteGreat flow and the finish seems good, we will
See after a winter of road salt
When reducing, is a mix of 3:1:1 to a much thinner?
Asked by: TWomack
My recommendation is not to use more than 5% reducer
Answered by: Anonymous
Date published: 2023-06-27
Is there any reason this paint should not be used for a boat if applied over an an epoxy primer ?
Asked by: treybert64
It should work fine.
Answered by: Anonymous
Date published: 2023-06-19
Does have metal flake init ,or is it just white, I'm looking for just white paint?
Asked by: Tatts
Just White
Answered by: Anonymous
Date published: 2023-05-23
Can this be clear coated?
Asked by: Tims Auto
Yes, you can certainly apply our clears over this without issues.
Answered by: Kelly H
Date published: 2022-09-28
What would be the closest match for touch up paint?
Asked by: Christian
Hi there,
Here is a link for a quart of this paint that can be used for touch-up.
https://www.eastwood.com/eastwood-usa-bright-white-single-stage-urethane-quart-kit.htmlhttps://www.eastwood.com/eastwood-usa-bright-white-single-stage-urethane-quart-kit.html
Answered by: ZachC
Date published: 2022-06-24
Can this be sprayed over your high build urethane primer?
Asked by: Loafer1
This can certainly be sprayed over the high build primer as long as it is finished with a 400-600 grit finish.