This classic off white Ford color is part of Eastwood’s Muscle Car Color Series.
The Eastwood Service PlanProtect your purchase with comprehensive coverage24/7 supportNo deductibles, no additional feesParts & labor costs includedTransferable coverage and more
Warranty Included
90 Day Returns + 100% Satisfaction Guarantee
FREE Lifetime Tech Support
The Eastwood Company Warranty
100% Customer Satisfaction Guarantee
At Eastwood we care about your DIY automotive projects and want you to be 100% satisfied with our products. That’s how we’ve done business since 1978.
Warranty periods vary per product and manufacturer.
The warranty period begins on the date the product is delivered.
Warranty refunds and exchanges require proof of purchase.
To obtain warranty coverage, contact Eastwood at 1-800-343-9353 for an RMA number.
FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email [email protected].
Makes 1 sprayable gallon when mixed 3:1 with a required activator
Approximate coverage: 125 SQ FT
Max Temperature: Paint will handle up to 300 degrees without delamination, but color shift may occur, so it should not be used in a high heat setting
Made in the USA
This premium 2-component topcoat system is blended with top-quality raw materials and advanced composition coatings technology. Superior to acrylic, alkyd and lacquer coatings. Eastwood's single-stage urethane paints hold their gloss longer and won't yellow.
When using single stage urethane how much time should I allow between coats.
Asked by: Bass4u
Recoat Window (Between Coats)
Wait 15–30 minutes between coats, or until the previous coat is tack-free (not sticky to the touch but still soft).
Do not exceed 1 hour between coats without sanding, or you may risk adhesion issues. Make sure temperature and humidity are within the recommended range (ideally 65–85°F with low humidity) for optimal flash and cure times.
Answered by: James Project Advisor
Date published: 2025-05-09
Does this match the Wimbledon white in the perfect match spray can that you sell?
Asked by: toad
I can answer my own question! Yes, it does. The only thing I noticed was the duplicolor spray can Wimbledon white was not quite as glossy as the single stage. Color match is almost perfect.
Answered by: Toad
Date published: 2025-03-17
Can you force dry this paint by baking in a paint booth?
Asked by: Mark
For Eastwood's Single-Stage Urethane Paint, the recommended baking temperature is 140°F (60°C) for 40 minutes after a 5-10 minute flash period. After the bake cycle, it is important to allow sufficient time for the vehicle to cool down before handling or reassembling.
Answered by: Bill G Tech Advisor
Date published: 2025-02-18
Does this require a compatible reducer, or is it ready out of the can after activation?
Asked by: DaveL
Reducer is not required but strongly recommended. It really helps with the flow out in general. This can be reduced up to 20%
Answered by: Kelly H
Date published: 2022-10-03
Can I get this in a quart?
Asked by: Slickrick
Unfortunately we do not offer this color in a quart size. The only size that we offer at this time is what is listed on this link here (a gallon kit).
Answered by: Kelly H
Date published: 2022-08-01
can you put clear over this single stage wimbeldon white
Asked by: Harry
Yes, any of our Urethane Clears can be used over this paint in reference.
