• Home
  • Eastwood Multi-Unit Welding Cart - MIG TIG Plasma
Eastwood Multi-Unit Welding Cart - MIG TIG Plasma is rated 4.3731 out of 5 by 67.
Rated 5 out of 5 by from Great cart, needs a few more lugs I bought it with the Versa Cut 60 to hold my mig welder and cutter on one assembly. It went together great in about 2 hours, and does the job well. Plusses, holds both machines and a gas bottle for the welder. Seems well made. Rolls nice. Seems stable with a 48" gas bottle. Minuses, Could use a few more lugs for holding cables. I know, I have a welder and cutter and I will be adding these. It would be nice if the flange at the handle end of the welder tray turned down instead of up. My welder has cables that come out low and hit it. Had to put a piece of plywood under the welder to clear this. Not a big thing.
Date published: 2013-08-19
Rated 2 out of 5 by from decent product for the money........ Like others have stated....better than Harbinger Fright...lol Was a little smaller than I expected but everything went together fine and the finish seems decent and there were just enough nuts / bolts to complete assembly. My little welder now has a new home other than sitting on a shelf. The larger back wheels are only plastic so that would be the only thing I would upgrade....maybe a steel rim with a plastic "tire". time will tell and then I'm sure something from TSC or the local hardware store could substitute. And maybe some rubber stick on feet for the welder bottom ( slides around a little) due to the slick enamel steel surface of the cart. I'm happy with the purchase overall.....Now - where's my discount coupon?
Date published: 2013-11-05
Rated 3 out of 5 by from not for use with medium or large bottles easy assembly, light weight and sturdy "enough" for this size cart. However the biggest issue with the cart is you can only use a small bottle of gas on the rack. Medium size bottles will fit on the bottom but not the top "U" shaped recess where you secure the bottle with the chain.... this effectively limited my use of this cart to about 6 feet of movement as I have to chain my medium sized bottle to the wall..... this my be fine for many hobby users that seldom weld. I weld several days a week and this is really a pain in the butt.
Date published: 2014-06-02
Rated 5 out of 5 by from Welder cart Fits my welder and cutter very well,sturdy construction , perfect for what I need!
Date published: 2015-07-15
Rated 5 out of 5 by from Welding Cart The Eastwood Multi-Unit Welding Cart is of high quality with good casters and wheels. When bolted together it is solid and with out wobbling, well able to hold the weight of two welders and a tank. Only two grips. 1. It has lots of sharp edges. 2. There is nothing to hold the top welder in place. In my case a Hobart Handler 190. I would like to have some strap or clamp or some thing to hold it in place. I'll have to find a way my self.
Date published: 2014-10-30
Rated 5 out of 5 by from Great products, unreliable pricing I have purchased both the tig and mig welders with carts - included in a package and separately - have been exceptionally well treated by customer services (beyond belief) and very happy with the quality relative pricing - sometimes - except that I feel like I've been screwed when the price quickly drops (i.e. look at tig/plasma cutter combo prices in past. I know it is marketing but still makes me reluctant to buy here.
Date published: 2014-12-11
Rated 5 out of 5 by from Good product bought this carts to make my life easier works well for my plasma cutter in my 135 Wilder hold them very nice only issue is I added two more hooks to each side from my local hardware store so I could hang my plasma cutter 25 foot cord on one side and a 25 foot 110 cord for the welder on the other side if it had two more hooks this would be a perfect item overall good item
Date published: 2015-09-02
Rated 2 out of 5 by from Overloaded when used as directed When used as directed this cart will be toting around well over 100 pounds so it needs to be strong. Unfortunately, cheap hardware and flimsy metal in key areas really let it down. It flexes quiet a bit laterally at the front which could have been aided by additional reinforcement around the lower end of the front vertical supports. The large rear wheels have actual bearings (good) but they are not even remotely close fitting to the axle that slides through them (bad) resulting in more wobbliness. I'm disappointed that improvements that really don't cost a lot (if anything) were not made to this cart before it came to market. An additional issue is that my tig filler metal tubes do not fit in the holes in the back area designed for them.
Date published: 2014-12-31
  • 2015-09-04T09:58CST
  • bvseo_cps, prod_bvrr, vn_cps_3.1.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_67
  • loc_en_US, sid_11616, PRD, sort_relevancy
  • clientName_eastwood

Eastwood Multi-Unit Welding Cart - MIG TIG Plasma

Item #11616 Brand: Eastwood

Put your welder on top, plasma cutter on the bottom, tools in the middle
Heavy Item - Special shipping charges may apply.


  • Top shelf which will hold the MIG135, MIG250, MIG175, or the TIG-200 welder
  • The bottom shelf will hold the Versa Cut Plasma Cutter
  • The middle shelf of the welding cart allows storage of necessary welding accessories
  • The Gas Bottle Mount incorporates a TIG Rod Holder to store up to 6 different tubes of filler rods
  • The design of the top shelf allows for the side access door on the MIG’s to be opened without taking the welder off the cart
  • Heavy duty front castor wheels
  • Molded Heavy Duty Rear Wheels
  • Satin Black Powder coated finish
  • Cut out in rear to allow plasma cutter cable routing through the rear of the cart
  • Holds up to an 80CF Gas Bottle
  • Front Mounted Handle for easy maneuverability around the shop
  • Two side hooks for cable storage

More info...

About Eastwood Multi-Unit Welding Cart - MIG TIG Plasma

These welding carts were designed by The Eastwood Company to make storage, accessibility and maneuverability of your welders and welding equipment easier than ever before.This cart incorporates a top shelf which will hold the MIG135, MIG175, or theTIG-200 welder. The bottom shelf will store your Versa Cut Plasma Cutter while the middle shelf allows storage of necessary welding accessories. The Gas Bottle Mount even incorporates a TIG Rod Holder to store up to 6 different tubes of filler rods. Assembles with simple hand tools.


Includes: Welding Cart with assembly Instructions


Will hold the following combinations:
MIG135 and the Versa Cut Plasma Cutter
MIG175 and the Versa Cut Plasma Cutter
TIG200 and the Versa Cut Plasma Cutter
MIG250 and the Versa Cut Plasma Cutter
May possibly fit other brand units as well


Click Here for instructions


This cart is intended to hold an 80 CF gas bottle, using a bottlelarger than this is not recommended.Always wear safety glasses and follow common practices when using hand tools.


Welding Cart Dimensions

Total Height - 26"
Total Width - 16"
Total Length (not including Handle) - 32"
Total Length (including Handle) - 38"
Top Shelf Width - 11.75"
Middle Shelf Width - 11.75"
Bottom Shelf Width - 11.75"
Top Shelf Length - 20"
Middle Shelf Length - 15"
Bottom Shelf Length - 17.5"

Customers also viewed: