• Home
  • Spray Max 2k Clear Glamour Aerosol
Spray Max 2k Clear Glamour Aerosol is rated 4.9 out of 5 by 22.
Rated 5 out of 5 by from Great petroleum resistant clearcoat I spent the last six months restoring my 1973 Honda CB500, which included entirely new paint job. The paint held up great, and the clearcoat looked great too...until some gasoline splashed out of the tank. Did some forum research and found the stuff you buy at the auto parts store isn't petroleum resistant, which lead me to Eastwood and the Max clearcoat. This stuff is great, it dried fairly quickly, and it looks incredible. At $25 per can, its not cheap, but then again you get what you pay for. High gloss, durable, heat resistant, definitely worth the price. Want proof? have a look at the final product.
Date published: 2015-05-04
Rated 5 out of 5 by from Extremely Pleased I was a skeptic, but gave Spray Max 2K a try on my car which had the clear coat wearing very thin and looking dull. After sanding the car parts, cleaning and tacking it, I used the Spray Max. It laid down beautifully with minimal effort. I have sprayed with paint guns that were not as effective at laying paint this flat! I haven't even done a cut and buff on it yet and may not because it looks so good. I am most impressed! We'll see how it holds up over time, but so far so good! It's a bit high priced, but I'm impressed with the quality. For do-it-yourselfers, make sure you use an appropriate mask and protective gear. It will require a proper respirator to protect yourself.
Date published: 2016-06-12
Rated 5 out of 5 by from Good Product This coating is easy to apply and has wonderful chemical and abrasion resistance. Gasoline just flows right off, and it keeps its shine during ordinary handling that goes along with maintenance of my motorcycles. I've used 4 cans over the past 3 years on vintage motorcycle gas tanks.
Date published: 2013-11-20
  • y_2017, m_9, d_20, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_en_US, sid_50772Z, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

Is this product safe to spray over acrylic lacquer color coat?

Asked by: Izznizz
Since this is a catalyzed product there is a chance it could react with the lacquer color coat.
Answered by: S Church
Date published: 2017-08-26

Will this work well for restoring plastic headlights that have hazed? Is an adhesion promoter required?

Asked by: Steve G
No you don't need to sand the headlights you can resto them with colgate tooth paste polishing brand water micro fiber towels rubbing the paste into the lights in a circle motion then rising off the tooth paste and wiping them dry it will take a couple of times to get them back to clear the video is on YouTube plastic headlight cures
Answered by: Schaumburg guy
Date published: 2017-09-01

Can this product be applied over typical epoxy resin/hardener for UV protection? The epoxy has been fully cured and sanded down.

Asked by: J adam
As long as the resin is completely cured and sanded there should be very little risk of any reaction. This would give you a nice strong UV protection clear.
Answered by: S Church
Date published: 2017-04-11

I am restoring a vintage racing bike. I have had the frame powder coated, pinstriped and have applied water slide decals. Is Max 2X High Gloss the right paint for my project? I am concerned about it working over the decals. Thanks

Asked by: Moon2
We have never tested this clear over top of any decals.
Answered by: S Church
Date published: 2017-04-09

I sprayed a guitar that I am building several days ago. The clear is still not hard. What can I do to assist curing? Heat?

Asked by: Draker41
(IR drying) for this item is 35-40 min. @ 140F.
Answered by: KHoffnagle
Date published: 2017-03-07

What kind of paint is this? I need to know if it'll damage the kind of decals I'm applying.

Asked by: Tricia0070
This is a urethane clear.
Answered by: S Church
Date published: 2017-03-07

Can I spray this over the existing clear coat on my motorcycle saddle bags? The existing clear is a little rough in places from years of use and sun. The base looks good, but I want to get the shine back.

Asked by: Bscrive
You would need to completely remove the old clear before applying your new clear based off the sounds of its existing condition.
Answered by: KHoffnagle
Date published: 2017-01-04

I want to clear coat my bare metal motorcycle gas tank. Can this product be successfully used over bare metal?

Asked by: AndyH
Yes, this can be applied to bare metal. You will want to make sure it is properly cleaned and de-greased with PRE paint prep or Acetone beforehand as well as abrade the surface with a red/ maroon Scotch brite to give it something to bite to.
Answered by: KHoffnagle
Date published: 2016-06-28
  • y_2017, m_9, d_20, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_29
  • loc_en_US, sid_50772Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Spray Max 2k Clear Glamour Aerosol

Item #50772Z Brand: Spray Max

This 2-component paint needs no mixing

In stock

Only $23.99

Sale $21.97

Details

Spray Max 2K Glamour High Gloss Aerosol Clear. A 2 component aerosol clearcoat that is easy to apply, flows smooth and dries to a long lasting, high gloss finish.

  • 2K clearcoat in an easy to use aerosol
  • Activate, shake and spray
  • Unique nozzle delivers spray gun results
  • Dries to a high gloss finish
  • Excellent weather and chemical resistance

2K patented aerosol allows you to paint with a two-component paint with no mixing! Spray Max's innovative nozzle and valve technology, combined with its two internal chambers ensure the right ratio is mixed every time. Sprays like a gun, broader spray pattern than conventional aerosols and no mess to clean up. You'll get professional results from an aerosol. Pot life 48 hours. 2K glamor gloss clear can be applied over any base coat, dry time 12 hrs. Smooth flow, long-lasting high gloss. Excellent chemical, weather and fuel resistance. 11.8 oz net weight. Made in Germany.


More info...

About Spray Max 2k Clear Glamour Aerosol


COLOR: Clear liquid (as packaged)
MIX: Ready to spray. Activate, shake and spray
SUBSTRATE: Properly applied basecoats
SUGGESTED USE: For use over all basecoats


Product Information Sheet

Click here to view product information sheet


Application

The 2K Aerosols only have a pot life of 48 hours after the 2 components are mixed and activated.


Customer Reviews

Questions & Answers

Customers also viewed: