• 3M™ Trizact™ Hookit™ Blending Abrasive Discs are designed for scuffing blend panels, texture matching orange peel, and removing fine grade sand scratches prior to paint blending
• Produces a dense scratch pattern in blend areas, eliminating all shiny spots and leaving a matte finish
• Used damp, they eliminate the need for scuffing compounds and wet sanding abrasives
• Foam backing provides plenty of control and consistent contact with the surface
• Flexible, it scuffs into valleys as well as tops of orange peeled textures without excessive leveling

Prepare blend areas for painting with consistent results using 3M™ Trizact™ Hookit™ Blending Discs. These foam-backed abrasive discs are designed for scuffing and sanding blend panels, texture matching orange peel, and removing sand scratches prior to paint blending on adjacent panels. Used damp, they eliminate the need for scuffing compounds or wet sanding abrasives.

3M™ Trizact™ Hookit™ Blending Abrasive Discs 1000 deliver a more predictable finish than traditional scuff sanding pads – producing a consistent matte finish with no shiny spots or burn through. Used for scuffing sanding blend panels, texture matching orange peel, and removing fine grade sand scratches - they produce a scratch pattern needed to help all base colors and clear coats cover and adhere. To deliver long life and consistent cut, 3M™ Trizact™ abrasives are built with three-dimensional structures that continuously wear to reveal fresh, sharp abrasive mineral. They're virtually self-sharpening. 3M™ Trizact™ Hookit™ Blending Abrasive Discs 1000 are foam backed to help provide improved control and responsiveness during sanding. Use the 3M™ Hookit™ attachment backing to attach the discs to a dual-action sander or hook-and-loop block. Used damp, they eliminate the need for scuffing compounds or wet sanding abrasives.