This variable-speed manual cold saw will make burr-free cuts in larger pieces of material. The cast iron base and flood coolant system help the saw stay accurate for many years.

• Circular cold saw takes a 14" blade (included)
• 4.7" round tube capacity at 90-degree
• Cold saw machine cuts through solids, tubing, and pipe
• Miters 45-degree left and right and can slot perpendicular to the material
• Fine-tune the variable speed from 24 to 120 rpm to improve cut quality
• Inverter-driven motor lets you adjust the blade speed with a dial to cover most applications
• Digital readout shows the blade speed to assist with repeatability
• 3 hp motor, coupled to a direct-drive gearbox, allows the blade to cut through the material chatter-free, so that blades last longer
• Runs on 220-volt single-phase power and will work in almost any shop
• European-style vise helps increase production with a taper lock system that speeds up clamping and unclamping
• Vise clamps on both sides of the cut to reduce chatter and increase blade life
• Serrated jaws provide maximum hold on the material
• Thick cast iron base, mounted on a heavy steel stand, stabilizes the saw to ensure accurate cutting for many years
• Powerful coolant pump lubricates the blade and washes metal chips away
• Flood coolant system allows for mill-like cuts, prolongs blade and saw lifespan, and reduces operator effort
• Covered by a 1-year parts warranty

Recommended for:

• Marine rails
• Playground equipment
• Hand railings
• Various chassis applications
• Other fabrication cutting jobs