Home /
Hotcoat Powder Coat Atomic Yellow

Hotcoat Powder Coat Atomic Yellow

Item #16042 Atomic Yellow

Intense translucent yellow powder that looks great over white bases or chrome

Atomic Yellow 8 Oz. Item #16042 $13.99	- + Quantity: Quantity: In stock
Atomic Yellow 1 Lb. Item #16042LB $18.99	- + Quantity: Quantity: In stock

Total $0

Details

Create a one-of-a-kind custom candy finish with Eastwood Atomic Yellow Powder!

Cure Time: 20 Minutes @ 400°F (actual surface temperature)
100% Virgin Powder
Gloss Level: High - 90%+ at 60 Degrees
Powder Type: Polyester TGIC
Storage: <80°F, well ventilated, <60% humidity
Durable enough for under hood applications and heat resistant up to 250 degrees F

This durable translucent top coat acts as a colored tint for your base powder or bare substrate. Apply alone as a single stage, over chrome powder to create brilliant yellow chrome, or over any other metallic or textured base powder for a dramatic candy finish! When applied over a bright white powder, Atomic Yellow will appear as a bright fluorescent yellow.

Split image shows left side over white base and right side over chrome base.

8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags

Specifications

Finish: High Gloss
Gloss Level. 90+ at 60 Degrees
Powder Type: Polyester TGIC
Cure Time: 20 Minutes at 400 Degrees Fahrenheit (Actual Substrate Temperature)
Coverage: 1 pound of powder = approximately 20 square feet

Safety

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Click here to see safety products

Warranty

1 Year

Application

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.

Eastwood Offers Free Lifetime Technical Support

Click here for product SDS information

Attention California Residents - Proposition 65

WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov