close
Find Anything, Fast!

Need Support or Have a Question?

Click Here
Holiday Gift Guide
  • Home
  • Eastwood Bench Top Powder Coating Oven
Eastwood Bench Top Powder Coating Oven is rated 3.7 out of 5 by 30.
Rated 5 out of 5 by from Great For Powder Coating Projects I choose this Powder Coating Oven over buying a toaster over, because of its size and having two racks. I used it for a project of restoring the floor resisters, vent covers, in our home. It worked very well. Its light weight, you can see your project through the big glass door, it comes with two racks and a rack removal handle. It looks good and easy to store out of sight when not in use. If you use the Eastwood powder coating stand, the racks work perfect with it.
Date published: 2017-08-26
Rated 5 out of 5 by from Great little Oven I have run a number of batches of parts in the powder coating oven, It is easy to load and unload and will work with parts up to the size of a differential cover. This oven is cost – effective and provides fast even heat. It takes up very little space, light weight and I rate at 5 out of 5 in its price range
Date published: 2017-06-19
Rated 5 out of 5 by from Works as described! I actually use this oven for cerakoting firearm parts, and as used so far, it works as it was designed too. The temperature seems to be within range and the timer is accurate, it's also light so moving it is not a problem I can't see much more to be asked of it.
Date published: 2016-07-25
  • y_2018, m_10, d_16, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_30
  • loc_en_US, sid_15635, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Can the over maintain 150 F for that hour? How stable is the temperature that low and what are the increments of temperature? Are we talking +/- 5 degrees fahrenheit, or in teh temperature flux larger?

Asked by: Lincoln
The oven will maintain whatever temp you set it to from 0 to 450 degrees. With any electrical oven there is a fluctuation when the heater element is on or off. We don’t have data to tell what the fluctuation would be between heating cycles of the element. Opening the door has the biggest effect on temperature fluctuation.
Answered by: SeanW
Date published: 2018-09-19

Can you bye pass the timer to run it continuously? will It hold 450 consistently or will it fluctuate?

Asked by: James
We have no specifications on modifying this unit to run differently. This unit will sit at 450 degrees as long as the door is left shut.
Answered by: Scott C
Date published: 2018-10-01

Newbie here. If you powder coat a part that is sitting directly on the rack will the powder also hit the bottom of the part evenly? Or should you have it hanging with a wire from the top rack? I don't want oven rack lines to show up on my painted parts...

Asked by: RobW
If you're looking to powder coat a part which needs powder all the way around you're going to want to hang the part. This way you have access to all sides when powder coating.
Answered by: Scott C
Date published: 2018-08-10

Revised question: I'm looking for a TOASTER OVEN that features the glass door attached to the bottom rack with hooks: much safer than the cook pulling out a hot rack with dish on it. I had one years ago but haven't been able to find one since.

Asked by: Kathie
Our backing racks are not attached to the door and do not move when the door is opened.
Answered by: Scott C
Date published: 2018-07-31

Can this oven fit a 12” motorcycle rim? 

Asked by: Austin
The internal dimensions are 16 inches L x 14 inches D x 8 inches H.
Answered by: Scott C
Date published: 2018-07-23

are the actual internal dimensions only 8" high? In the video, it looks bigger than that, or is that a different oven?

Asked by: keith
It is slightly larger but 8 inches is the "usable" internal height.
Answered by: Scott C
Date published: 2018-06-25

If my diff cover fits in the oven, can it heat up a heavy piece of steel like a custom diff cover and end up with a nice powder coated surface? Also, what kind of tape/material should be used to plug threaded holes and the such?

Asked by: DIYJOE
As long as the part fits you should have no problem powder coating it. On thick parts simply have the oven up to 450F and minimize how long you have the door open when loading the part. Having the oven up to 450F will help the large part get to temp quickly since there is more heat to absorb. Once the powder flows out turn the temp back down to 400F to finish the cure. Our silicon plug kit is perfect to protect threaded holes from un wanted powder.
Answered by: Scott C
Date published: 2018-06-06

If this is a convection oven can a convection oven like you buy in Walmart be used as well?

Asked by: Teri
This is a convection oven to speed the heating and cure times of your powders. While you could use other ovens this one will have generous inside dimensions for fitting your parts.
Answered by: Scott C
Date published: 2018-06-09
  • y_2018, m_10, d_16, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_26
  • loc_en_US, sid_15635, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Bench Top Powder Coating Oven

Eastwood Bench Top Powder Coating Oven

Item #15635 Brand: Eastwood

Eastwood Bench Top Powder Coating Oven
Quantity:
Quantity: close

In stock

Only $106.99

 

< Back

Details

The ideal oven for small to mid size powder coating projects. Owning this economical, dedicated powder coating oven ensures that you have the right oven for the job. Easily stores under a bench and is ready when you need it.

  • 120 Volts AC 50/60hz
  • 1400 Watt
  • ETL listed
  • 4 Stainless heating elements
  • 0-450 Degrees F heat range
  • 60 minute timer on/off knob
  • On/Off control switch
  • Quick heat recovery
  • Low E glass door
  • Insulated case
  • Power indicator
  • 2 chrome powder racks
  • Internal dimensions: 16 inches L x 14 inches D x 8 inches H.
  • External dimensions: 21 inches L x 15 inches W x 13 inches H.

The ideal oven for small to mid size powder coating projects. Owning this economical, dedicated powder coating oven ensures that you have the right oven for the job. Easily stores under a bench and is ready when you need it. It is 1400 watt, 110 volt, ETL listed, and has 4 stainless heating elements, 0 F to 450 F heat range, 60 minute timer, on/off knob, quick recovery, Low E glass door, insulated case, power indicator, and 2 chrome oven racks. Usable internal dimensions are 16 inches L x 14 inches W x 8 inches H.Not for use with food


More info...
< Back

Contents

(1) Benchtop Powder Coating Oven
(2) Wire Racks
(1) Rack Handle


Accessories

11676 Dual Voltage Powder Coating Gun
Eastwood Dual Voltage Powder Coating Gun Starter Kit
31223 Non Contact IR Thermometer
10252 Standard Powder Color Sampler Kit
10255 Specialty Color Sampler Kit
51358 Metallic Color Sampler Kit


Instructions

Click here for product instructions


Safety

Surfaces will be hot. Follow the safety warnings listed in the user's manual.

Click here to see safety products


Warranty

1 year defect warranty.


Application

Consult The Powder Coating Handbook (14104) for complete powder coating instructions, tips and tricks.


Product Video


Attention California Residents - Proposition 65


Proposition 65 Warning WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov



< Back

Customer Reviews

< Back

Questions & Answers