FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email projectadvisors@eastwood.com.
Eastwood's Tank Tone is more than just gas-tank paint...metallic coating also helps prevent rust!
Get that factory OEM look plus corrosion protection
Formulated with zinc to prevent corrosion
No primer needed
Each 13-oz. filled aerosol can covers 8 sq. ft.
10-15% Gloss level
300°F Heat resistance
Two cans recommended for complete coverage of most gas tanks
Don't mistake this for ordinary silver gas-tank paint! This fuel-tank paint actually contains zinc to help protect your gas tank from rust.
Note: Not for sale in California
What's Included
One 13 oz. aerosol covers approx. 8 sq. ft. Maximum temp. 300F. Epoxy. Contains Zinc. Two cans are recommended for complete coverage on an average tank.
Always wear proper eye, skin and respiratory protection. Always paint in a well-ventilated area away from sparks and open flame. Consult MSDS and product data sheets for proper safety precautions.
Can Tank Tone be clear coated after it dries? I sprayed my gas tank with 2 coats and i don`t really care for the textured rough feeling of this coating. I was think of lightly sanding it and putting clear coat on it. Would there be any recommendations?
Asked by: Russell
Yes, you can clearcoat the Tank Tone Metallic Coating. Applying a clear coat over it can provide additional protection and enhance the finish. Tank tone should lay flat and not be too rough textured. Application style could affect that. Distance, thickness of coats etc.