- DeKote Paint and Powder Stripper
About DeKote Paint and Powder Stripper
Eastwood's DeKote Paint and Powder Stripper contains no Methylene Chloride and will safely and effectively remove urethane, epoxy and powder coatings. DeKote will not harm steel, aluminum, pot metal, die cast, fiberglass or SMC panels. The longer dwell time of 30 minutes to 3 hours, means it does not work as fast as Methylene Chloride based strippers, it provides time for DeKote to penetrate mulitple coats and deeper. Easy to apply by immersing or brushing on the surface. NOTE: DeKote may have difficulty removing powder from cast parts.
1 US gallon 10041ZS PRE Painting Prep Always wear eye, skin and respiratory protection. Apply in a well ventilated area. Keep out of reach of children. Read all label warnings and follow application instructions.
43098 Nitrile Gloves
14149Z 2K Aerospray Epoxy Primer
10041ZS PRE Painting Prep
Always wear eye, skin and respiratory protection. Apply in a well ventilated area. Keep out of reach of children. Read all label warnings and follow application instructions.
Customers also viewed:
Covers everything from getting started, to common problems and solutions, and advanced techniques
Water-based formula removes anodize coatings as fast as 20 minutes
25-135-amp, industrial-quality, MIG 135 Welder, 120v -- low DIY price!
Dissolves rust, leaves a protective zinc-phosphate coating, all in 1 step
Starting at: $16.99
100-lb. blaster has large, high-flow valves to speed rust/paint removalOnly $185.99