Item # 21119 BRAND: Eastwood

1.5inX5in Radius 120 degree Die

1.5inX5in Radius 120 degree Die for Eastwood High Capacity Tubing Bender
1.5inX5in Radius 120 degree Die for Eastwood High Capacity Tubing Bender
1.5inX5in Radius 120 degree Die is rated 4.2 out of 5 by 27.
  • y_2024, m_3, d_18, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_9, tr_18
  • loc_en_US, sid_21119, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 31.92ms
  • REVIEWS, PRODUCT
$296.99
Loading...
Loading...
Save for Later
1.5inX5in Radius 120 degree Die for Eastwood High Capacity Tubing Bender

1 year Warranty Included

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

  • • 90 Day Returns
  • • Lifetime Tech Support
1.5inX5in Radius 120 degree Die

Product Overview:

Description

Achieve 5 Inch bends up to 120 degrees on 1.5 Inch OD tubing with this Mandral Die and the Eastwood High Capacity Tubing Bender.

Warranty

1 Year

In the Box

Contents

One 1.5 Inch X5 Inch Radius 120 Degree Die

Application Tips

For Eastwood High Capacity Tubing Bender.

Reviews

Rated 5 out of 5 by from Whole roll cage built with minimal issues I did have an issue with a bend pin, but Eastwood remedied that quickly.
Date published: 2023-03-05
Rated 5 out of 5 by from Nice Unit I need to fight the pin out of the saddle to get the bent tube out, but I figured out a technique to make it work. Probably just that I am using it at its limit on 2" x .120-wall tube.
Date published: 2023-03-05
Rated 5 out of 5 by from Fits the Woodward WFB2 Bought this to find out if the Woodward Fab and Eastwood tube bending dies were interchangeable. The answer is yes. These dies fit the Woodward Fab WFB2 bender. Read the other reviews and I can tell you the one where the holding clamp got bent was operator error. If you use the shortest pin it doesn't seat far enough and the bottom will slip off. So make sure you use the correct pin.
Date published: 2020-02-20
Rated 5 out of 5 by from It Fits WFB2 Bought this die to figure out once and for all if the Woodward Fab and Eastwood tubing dies were interchangeable. The answer is YES THESE DIES WILL FIT THE WFB2 tubing bender as well.
Date published: 2020-02-20
Rated 5 out of 5 by from advice for soft tubing Reading through the reviews I see many questions about bending aluminum and kinking issues. The trick to bending soft materials with any bender is to cap one end of the tube, fill it with sand, then cap the final end. The sand will go around the bend and support the tube from the inside.
Date published: 2019-06-23
Rated 5 out of 5 by from Fantastic Bender! Had a commercial handrail job and needed a bender. Purchased the Eastwood High Capacity Tubing Bender with the 1 3/4" 240 degree die set, watched a few Youtube vids and decided to purchase the Air/Hydraulic 8 ton hydraulic ram from HF. , then went to Swagoffroad.com and ordered the mounting kit compatible with the Eastwood tubing bender. The bender performed with perfection bending 1 3/4" x .120 wall tubing up to 103 degrees for a final of 98 degrees. You have to bend a bout 5 degrees over your target to compensate for spring back. Attached are some photos. When the railings are out of powder coting and installed in front of Dollar Tree in Silverton Oregon, I will post them as well.
Date published: 2019-01-14
Rated 5 out of 5 by from very well constructed The leverage action makes it very to bend 1.5 inch .100 wall tubing A little tricky getting tubing out of the die. but a heavy duty C-clamp solved the problem.
Date published: 2016-07-28
Rated 4 out of 5 by from NEEDED addition! I can't even imagine bending w/o this handle, as I had to add an ADDITIONAL 3ft of handle to be able to bend easily. I added a solid bar inside this handle and that slides in and out, as needed, and makes it all work WAY better.
Date published: 2023-03-05
  • y_2024, m_3, d_18, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasreviews, tv_9, tr_18
  • loc_en_US, sid_21119, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 21.15ms
  • REVIEWS, PRODUCT

Questions & Answers

How would you remove the material after you bent it to 240°?

Asked by: Twisted trail tech
you can tap the tubing off the tool by using a rubber or wooden mallet.
Answered by: Anonymous
Date published: 2023-05-06

Does the 120 degree die work differently than the 240 and how? Tnx

Asked by: 396mafia
The die does not operate any differently, but you will be limited to 120° or 240° maximum bends. If you need more than 120° of angle definitely go with a 240° die.
Answered by: Nick BC
Date published: 2022-05-26

Do you have a 1 1/4, die for tubing bender?

Asked by: Steve
We do not have a 1.25" die for this bender at this moment
Answered by: ZachC
Date published: 2022-05-12

I can bend pipe 1-1/4 sch40. Normally what I work are railings.

Asked by: Ricardo
We do not offer a 1 1/4" die at the moment
Answered by: ZachC
Date published: 2024-02-09

Will this bender work to bend EMT conduit if you use the correct die? I need to bend 1.25" EMT conduit, the OD is 1.50 and the wall thickness is .072

Asked by: Walter
We do not recommend using this tool to bend EMT conduit.
Answered by: ZachC
Date published: 2024-02-09

Can the bender bend 1 1/4 dom tube

Asked by: Qelder92
We do not currently have a 1 1/4" die for this machine at this time.
Answered by: SeanW
Date published: 2021-06-08

Is the a die set to bend for square tubing?

Asked by: Antny
This is for round tubing only. Unfortunately, we do not currently offer any dies for square tubing.
Answered by: Kelly H
Date published: 2024-02-09

Will these work on a pro 105 bender

Asked by: Big Block
The 1.75in X 6in Radius 240 degree Die(21127) is specified for the Eastwood High Capacity Tubing Bender (21115). As we do not have cross reference material we can not determine if it will fit your bender, You may want to call the manufacturer of your bender for specifications and details.
Answered by: vince
Date published: 2021-01-25
  • y_2024, m_3, d_18, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_74
  • loc_en_US, sid_21119, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 32.74ms
  • QUESTIONS, PRODUCT
Glossary
Unsure of a term? Look it up on our Glossary powered by The Garage
We found other products you might like!
1.5inX5in Radius 120 degree Die
$296.99
In Stock