Item # 10100 Hotcoat Powder Gloss White BRAND: Eastwood

Eastwood HotCoat® Gloss White Powder Coat

Extremely durable, chip-resistant finish; coat and cure in under an hour

Grouped product items
Product Name	Qty
Eastwood HotCoat® Powder Coat Gloss White - 8oz	In Stock $8.99
Eastwood HotCoat® Powder Coat Gloss White - 1lb	In Stock $14.99
Eastwood HotCoat® Powder Coat Gloss White - 25lb	In Stock Reg. $307.99 Sale $277.97 Save $30.02
Eastwood HotCoat® Powder Coat Gloss White - 50lb	Out Of Stock. Due back June 6 Reg. $527.99 Sale $475.97 Save $52.02

Starting at$8.99

Save for Later

Extremely durable, chip-resistant finish; coat and cure in under an hour

100% Satisfaction Guarantee Since 1978
We stand behind our solutions and customers.

• Lifetime Tech Support

Eastwood HotCoat® Gloss White Powder Coat

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Overview:

Description

Do The Job Right with Eastwood Powders!

Provides extremely durable finish
Contains no environmentally harmful solvents
100% Virgin powder
Impact resistant and flexibility
Good chemical resistance
Durable enough for under hood applications and heat resistant up to 250 degrees F
Made in the USA

Eastwood Powders are far superior to liquid coatings. They provide an extremely durable finish that is chip resistant. All Powders are formulated of the highest quality materials and are chemical and fuel resistant. They are suitable for any metal surface and most cure at a temperature of 400 degrees F at 20 minutes after flow out. With Eastwood powders, you can be assured of high transfer efficiency and brilliant colors.

Warranty

Eastwood 100% satisfaction guarantee

Specifications

Color: Gloss White
Gloss Level: Gloss
Cure Temperature: 400 Degrees
Cure Time: 20 Minutes after flowout
Powder Type: Polyester TGIC
Finish: Smooth
Coverage: 1/2 lb. of powder is approximately 10-20 sq. ft.

In the Box

8 Ounce powders are packaged in plastic bottles
1 Pound powders are packaged in plastic Bags

Guides & Accessories

Safety Information

When applying powder always apply it in a well ventilated area away from heat sparks and open flame. Always use a respirator rated for dust while applying powder. Always store powders in cool (less than 80 degrees Fahrenheit) dry (60 percent or less humidity) well ventilated area away from heat sparks and open flame.

Application Tips

CLEAN - Thoroughly strip and clean your metal part before coating. We recommend Eastwood Pre Painting Prep.

COAT - Apply using Eastwood DIY HotCoat Gun 11671A or the Eastwood Dual Voltage HotCoat Gun 11676.

CURE - Cure the part in an electric oven for recommended time. NEVER use an oven that is used for food.