Find Anything, Fast!

Need Support or Have a Question?

Click Here
Hand Air and Power Tool Sale
  • Home
  • Eastwood Corner Vise
Eastwood Corner Vise is rated 4.8 out of 5 by 13.
Rated 5 out of 5 by from Corner Vises are top-notch I bought two of these corner vises to assist assembly of 2" square steel tubes to frame a workbench. They pulled the two tubes together in a perfect, 90 degree joint which allowed me to tack weld front and back sides. I did the top two corners of the frame, followed by the bottom two corners. My only mistake was not buying four of them; if I had, I would have easily tacked all four corners at the same time. Definitely, recommend these corner vises.
Date published: 2018-03-26
Rated 5 out of 5 by from Great product Just bought this tool for a specific job I had coming in. The tool works great and holds the tubing in place well. Very happy with this buy.
Date published: 2018-03-14
Rated 5 out of 5 by from Welder’s Helper Heavy-duty, well-built vise. Have only used it on 1 project so far, but it met my needs. Like others have said, it is great for square tubing, but more difficult to align angle iron. Had same problem with the end nuts, but I solved it with vice grip pliers.
Date published: 2017-10-26
  • y_2018, m_8, d_16, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_30722, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Say i wanted to do a T joint with these, what is the maximum thickness of the piece that will fit going through the clamp and out the back side?

Asked by: Mikelson
Maximum "T" joint is 3.25"
Answered by: Kelly H
Date published: 2018-06-25

How deep is the vise channel/throat? 

Asked by: Arnold
...thanks Scott C., but sorry, I neglected to specify vertical size. Mea culpa.
Answered by: Arnold
Date published: 2018-01-24

Is this magnetic?

Asked by: MrBigTool
This unit is not magnetic.
Answered by: S Church
Date published: 2017-05-16

What is height of the clamp? 

Asked by: Wookie
This clamp is 2.5 inches tall.
Answered by: S Church
Date published: 2017-04-22

How much weight

Asked by: Mohammad
This product weighs 12 pounds.
Answered by: S Church
Date published: 2015-12-22
  • y_2018, m_8, d_16, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_30722, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Corner Vise

Eastwood Corner Vise

Item #30722 Brand: Eastwood

Hold your work for perfect 90° miter and T joints every time
Quantity: close

In stock

Only $59.99


< Back


Hold your work for perfect 90° miter and T joints every time

  • Perfectly square joints every time
  • Durable cast iron construction
  • Portable, or bench mountable
  • Jaws open to accept up to 3.25in
  • Copper plated screw spindle
  • Self-centering and swiveling jaw

Without a proper way to hold work pieces correctly, it’s almost impossible to get an accurate, square joint when fabricating. The corner vice holds pieces up to 3 1/4 inches thick, tightly and at a perfect right angle for welding or machining. Bolt it down to your work bench, drill press, or mill, or just use it as a portable clamp for smaller jobs. The heavy cast iron construction makes it strong and stable, even when not bolted down, but it’s not so heavy you can’t move it around the shop, or take it to the job site with you. The opening where the jaws come together means you can clamp T shaped joints too. The clamping jaw swivels and self-centers, it is free to move and hold 2 different thicknesses of material together. The threads on the screw spindle are copper plated to keep them clean and free of welding slag mishaps, for years of use.

More info...
< Back

About Eastwood Corner Vise

This Corner Vise is constructed from heavy cast iron with machined clamping surfaces and base to provide a firm hold on your project. It is designed to be bench mounted or used freely around the shop. This clamp is extremely durable for years of use. The spindle features copper plated threads and the jaw swivels and self centers for holding different sizes of work pieces. Maximum clamping size is 3.25 inches.


Contains One Corner Vise


Always wear proper safety equipment when using this type of tool and tools associated with the use of this tool.


Made in India, 60 Day Warranty

< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: