• Home
  • Tubing Bender Rolling
Tubing Bender Rolling is rated 4.428571428571429 out of 5 by 14.
Rated 4 out of 5 by from its pricey BUT the BEST tool for the job. Im a real cheapskate, I use harbor frieght for most of my tools but this was the only tight diameter bender I could find and Im on a time limit to make the cruise. I think it could be cheaper BUT its still worth every penny!! I was able to run the whole car with these tight bends in the factory route!! Normally I cant make brake lines look factory cause of how large the bends are, this made it look factory and professional!!
Date published: 2014-04-10
Rated 4 out of 5 by from High quality tubing bender This tubing bender works just as advertised, allowing very tight bends without flattening the tubing. It's a little expensive compared to standard tubing benders but you get what you pay for. With intricate bends the bench mount flange can get in the way but it can be cut off if necessary. After making over 100 tight bends, the tool works as well as it did with the first one.
Date published: 2010-06-07
Rated 2 out of 5 by from expensive and not well made The idea is great: a compact tube bender that can make small radius bends in tight spots. unfortunately, the design and manufacture allows the bending 'head' to partially rise up and slip over 1/4" tubing rather than staying engaged with the tubing. this might work better with 3/16" tubing because the rollers for that are placed differently.
Date published: 2013-03-27
Rated 5 out of 5 by from Tubing Bender Rolling I bought this to replace rusty brake lines on my '94 Mustang. The factory bends are in places 1" radius bends. They were easy to duplicate with this tool. I am very happy with this tool and I would recommend it.
Date published: 2015-04-05
Rated 5 out of 5 by from Tubing bender Tubing bender works very well.A little pricey but you get what you pay for
Date published: 2013-02-24
Rated 5 out of 5 by from Actually bends 3/16 brake lines I am the proud owner of 4 different brake benders. Most, if not all, of the harbor freight, sears, auto part store benders say the bend 3-16 but are sized for 1/4. That allows you to bens 3-16 and kink the bend. I am converting my 70 Superbee over to disk brake and needed to tool to be able to make the bends that I need. This is hands down the best 3/16 bender I've found for the money. It is tricky to figure out the first time you use it but I haven't experienced it ever kinking the brake line. This is the best tool I've used so far.
Date published: 2016-05-22
Rated 5 out of 5 by from Great little tube bender I purchased this tool a while ago and have used it for brake lines and hot air choke lines on my 68 TBird. It does a fantastic job on the smaller bends required but the only criticism I have about it is the small roll pin used to keep the handle from moving around on top of the wheel. I have now broken 2 of these roll pins and I think you would be better off having a small solid hardened steel pin in place rather than the roll pin. Apart from this problem, it is a great tool and has certainly paid for itself since my purchase.
Date published: 2015-12-10
Rated 4 out of 5 by from Good tool but need video instructions Well built, nice. I could not find any step by step or video instructions. Trying to do custom stainless lines (bought from you guys) and need to do a very precise job. It doesn't have a "0" mark or angle indicator. Can some one on Eastwood TV do a step by step?
Date published: 2016-01-25
  • 2016-09-27T07:47CST
  • bvseo_cps, prod_bvrr, vn_cps_3.4.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_49041, PRD, sort_relevancy
  • clientName_eastwood

Tubing Bender Rolling

Item #49041 Brand: Eastwood

Rolling-cam bender bends and forms
in one smooth motion, distortion-free

Details

Rolling-Cam Tubing Bender bends and forms in one smooth motion, distortion-free Use this tool to form tight bends in brake and fuel lines without kinking or flattening, or harming protective coatings.
  • For 3/16"- and 1/4"-O.D. coated tubing
  • Minimizes stretching and distortion
  • Create bends as tight as 1" in radius

More info...

About Tubing Bender Rolling

Rolling-Cam Tubing Bender utilizes a free-rolling follower cam to minimize stretching and distortion when bending tubing. This produces uniform, tight, 180-degree bends down to a 1" radius. Will not harm protective surface coatings on fuel and brake lines. Comes apart for easy placement over long pieces of tubing. For bench use, a tab is provided on the lower handle.


Contents

Rolling-Cam Tubing Bender


Accessories

49053 Brake Line Tubing, 25' long, 3/16" O.D.


Customers also viewed: