• Home
  • 2K Aerospray Rat Rod Satin Black
2K Aerospray Rat Rod Satin Black is rated 4.0 out of 5 by 25.
Rated 5 out of 5 by from You get what You pay for ! I was so impressed with the last Softail that I painted that I bought 3 more cans for another one ! Its spray nozzle works well and lays down the paint pretty well. I could see coverage per can being an issue for larger automobile projects as I am using one can per tin (front fender, rear fender & tank). Just remember that prep work means everything and make sure Your project is clean before application and You wont be disappointed. As someone else posted ; make sure You don't run the can empty as it will start to splatter when it gets low.
Date published: 2015-06-09
Rated 5 out of 5 by from PLEASE READ IF YOU'RE HAVING SPATTER PROBLEMS I read the reviews and noticed quite a few people were having spatter problems but I decided to chance it a purchase it anyway. I bought 20 cans of the stuff with high hopes that there wouldn't be any problems. I made sure I went step by step when shaking the can and adding the catalyst... and the conditions where right for painting. So I put on my gloves and suited up and made my first pass and almost immediately, boom, spatter. I was pretty upset but decided to keep going.. well, that was a mistake. More and more droplets would appear. By that time I was cursing myself for spending the money on the paint. I took a break and looked down at my glove and noticed the tip of my finger was covered in paint (gloves are black so I didn't notice right away). The spray pattern is so wide that it was actually hitting the tip of my finger where there was that extra bit of glove that hangs off. When enough paint collected it would shoot off the end of my finger and onto the paint. I tested it just to be sure and yep, more droplets. I decided to go gloveless and made sure to use the tip of my finger to press and didn't have a single spatter. I even made sure to use the same can that produced spatter before and didn't have any problems. I feel like this is the problem most people are having. Your finger gets tired or the button is too hard to press and you end up using more of your finger so you can press harder, then your finger tip gets into the spray pattern. My suggestion would be to go without gloves, or wear really tight ones, and to use this stuff for small projects like motorcycles or smaller parts. A whole car is very doable but it would be difficult to get a perfect result. I ended up with tiger stripes on the roof because you cant hold the can parallel to the car without it malfunctioning, so with that angle the paint would bunch up on one side. I hope this helps someone in the future. I'm very happy with the way the paint looks when it dries (where there isn't any droplets). THIS IS A VERY GOOD PRODUCT, I'm going to sand away my mistakes and go for it again.
Date published: 2016-10-30
Rated 2 out of 5 by from everything was great until.. ...it started spitting out paint in droplets. Pretty much ruined what would have been a very nice job. Unfortunately being that its a satin, I cant color sand the nibs down and polish unless I want a gloss. Very disappointing. Maybe its necessary to keep shaking the can every so often would help, not sure. It was my second attempt with this product, and in both cases , the results were the same. The idea is great and it certainly makes things easier for a novice like myself to get the hang of applying a nice even coat without the all the complications of mixing paint and operating a spray gun, but I wouldn't use this product again unless it was a gloss in which case there would be some room for error.
Date published: 2014-04-13
  • y_2018, m_2, d_20, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_25
  • loc_en_US, sid_14791Z, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_eastwood

I am re-painting the interior metal components (dash, pillars, doors) of my '65 GTO in black. Would 2K satin black be a good product for interior application? I would apply 2K black primer on bare metal, then apply this paint. Do I need to top coat?

Asked by: 2ocnorb
This 2K paint would be a great option. First you would want to apply the 2K Epoxy primer then top coat with this paint. No clear coat is needed for this material.
Answered by: Kelly H
Date published: 2018-02-15

I’d like to use your 2k rat rod satin black to cover my chrome rims besides preping with grey scuff pad & 400 wet & dry and using goof off to prep is there a better method I should use should I primer ?

Asked by: Misfitmaris
you will need to use primer first. We would strongly recommend the Epoxy: https://www.eastwood.com/eastwood-s-2k-aerospraytm-epoxy-primer-gray-black.html. First abrade with 320-400 grit then wipe down with PRE and apply the Epoxy. Your 2K paint can be applied directly over top.
Answered by: Kelly H
Date published: 2018-02-13

In August of 2015, I spray painted my silver 2000 Honda Insight with Rustolium semi-gloss black rattle cans. Some parts looked good, other areas not so good. Can I use this product over the Rustolium paint that has been on the car since last year? 

Asked by: Marq74
I’d like to use the 2k rat rod satin black over these chrome rims I’ve used grey scuff pad 400 sand paper and will use goof off to prep do you have any advice for this method should I prep another way should I use a primer or is the way I describe sufficient
Answered by: Misfitmaris
Date published: 2018-02-13

I don't know what rat rod satin black means.  I just want a satin black paint.  Is that what this is or is it something weird? 

Asked by: braumeister
This is a Satin Black finish paint.
Answered by: Kelly H
Date published: 2018-02-12

Want to paint my fuel tank with this, However, I have added some vinyl decals to the tank. Should I put a 2 or 3 coats of 2k clear over to ensure the vinyl stays for good?

Asked by: Mike
Clear coat would be an excellent way to hold down decals.
Answered by: Scott C
Date published: 2018-02-08

I'd like to use this to cover some chromed plastic parts. What is the best course for prepping the item?....self etch primer or adhesion promoter?...strip chrome?

Asked by: speedmaster
As long as you do not cut through to bare plastic you will not need to have an adhesion promoter. Just a self etch or Epoxy primer would be fine.
Answered by: Scott C
Date published: 2018-02-12

I'm planning on using the 2K Aerospray Rat Rod Satin Black to paint a rear bumper/tire carrier build after I treat it with POR15. Can I use this product directly on top of POR15 or do I need a primer? Thanks!

Asked by: jeepbuild
I would scuff the por15 with 320 grit, apply a full coat of por15 tie-coat primer, then apply the 2k primer over that, followed by your 2k paint top coats.
Answered by: JPScout800
Date published: 2017-12-12

I have a can of this paint with a date stamp of 08/15/2014. In reading the product information sheet it said that the shelf life is 24 months. Is it okay to use or should I discard it.

Asked by: danman92
This product is actually good up to 3 years. At this point it should still be good for a little longer.
Answered by: S Church
Date published: 2017-09-25
  • y_2018, m_2, d_20, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.7
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_32
  • loc_en_US, sid_14791Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

2K Aerospray Rat Rod Satin Black

Item #14791Z

2K Aerospray™ Rat Rod Satin Black

In stock

Only $22.99

Details

Eastwood's 2K Aerospray Rat Rod Satin Black Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun!

  • 2-Component Catalyzed Technology
  • Two Chamber Design Aerosol
  • Most Durable Aerosol Paint Available
  • Sprays Like a Paint Gun

Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols, and no mess to clean up. You'll achieve professional results from an easy-to-use aerosol.


More info...

About 2K Aerospray Rat Rod Satin Black

Eastwood's 2K Aerospray Rat Rod Satin Black Aerosol allows you to paint with the durability and precision of a two-component coating without the paint gun! Formulated with Eastwood's proprietary nano ceramic technology to provide a long-lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers, ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols, and no mess to clean up. You'll achieve professional results from an easy-to-use aerosol.


Contents

11.8 ounces net weight


Accessories

Eastwood Rust Converter
10041Z PRE Painting Pre
SAS Bandit Respirator
Chassis Kleen
2K Epoxy Primer


Product Info Sheets

Click Here for product info sheets


Safety

Always wear eye, skin and respiratory protection when using this product.Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings


Warranty

Made in Germany


Application

Before activating, shake aerosol vigorously for 1 min. Take red button from cap. Rotate aerosol 180 degrees and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life 48 hours at 68 degreesF.


Customer Reviews

Questions & Answers

Customers also viewed: