Eastwood's Ceramic Chassis Black on My Classic Car Eastwoods 2K Ceramic Chassis Black is a super-durable coating that is not only beautiful, but tough as nails. Proprietary formulation imbeds finely ground ceramic particles into a high quality 2K (two component) 4:1 chemical base. Provides a chip and chemical resistant coating, incredible UV resistance, fast dry times and a finish second to none. Easily applied with a HVLP spray gun (1.5-1.7 tip). Apply over Eastwoods 2K Epoxy Primer for the ultimate no-worry, factory-correct finish.
Eastwood's Single-Stage Urethane Paints on My Classic Car Eastwood makes it easier than ever to get the quality paint you need to achieve professional results. Our line of Premium Single-Stage Urethane Paints are formulated to our high standards of quality to ensure ease of application and show quality results.
Eastwood's Liquid Chrome Coating Paint-on chrome with Eastwood's Liquid Chrome. Now you can achieve a surface that approaches the reflectivity of chrome. This paint is unlike any other you may have used. Just start with a perfectly smooth glossy black surface and apply a few very light mist coats of Liquid Chrome, followed by Liquid Chrome Clear and provides the perfect accent for custom graphics.
Eastwood's Tin-Zinc Electroplating System Rejuvenate parts with Tin-Zinc plating.Take your dull parts to a brilliant luster. Plate almost any metal part-including brass,copper, and steel (not for aluminum, pot metal, or stainless steel).The Tin-Zinc Electorplating System brings a brilliant luster to properly prepared metal parts with a corrosion-resistant, protective plating resembling chrome, but without the expense, hassle, or hazards.
Eastwood's Internal Frame Coating Internal frame coating is formulated to convert and encapsulate the rust INSIDE your frame. Our formulation also incorporates zinc phosphate to further protect the metal from future corrosion. The viscosity is stabilized to assure proper flow and penetration to the existing corrosion and will yield complete coverage when sprayed with the included "conical nozzle". Easy to use, must have product, that is aerosolized to simply spray the entire inside of the frame with the supplied extension tube and "conical nozzle" for complete coverage and elimination of the rust for years of protection. Fully cures in 24 hours.
Eastwood's After Blast After Blast is designed to clean, degrease and etch freshly blasted or sanded metal prior to painting or powder coating. Use with a plastic spray bottle to liberally apply to the part, wipe and reapply until all contaminants are removed. The blend of aqueous cleaners and phosphoric acid properly cleans, etches the metal and leaves a zinc phosphate coating that is excellent for paint, primer or powder adhesion. Also protects the metal from flash corrosion for extended periods. Use on all your fresh cast iron, steel or aluminum components.