Do the job right
800-343-9353

Find Anything, Fast!

Need Support or Have a Question?

Home
Eastwood 2K Ceramic Aerosol Underhood Black

Eastwood 2K Ceramic Aerosol Underhood Black is rated 3.9 out of 5 by 18.

Rated 5 out of 5 by 72Lawrencem from Excellent paint I've used Rustoleum in quite a few applications but this paint is different in that it goes on with an excellent finish, the only a few minor issues are that the instructions "must" be followed exactly (shake the can vigorously before and during mixing for the amount of time specified) also the can must be held upright while painting (paint tends to spit when the can is held at an angle) and because the paint and primer are pricey and has a shelf life of 48 to 72 hours paint as many components as possible otherwise this pricey paint will go to waste, the motorcycle head and engine covers and a lathe headstock I painted came out phenomenal, the finish was excellent, Rustoleum didn't even compare.

Date published: 2017-05-20

Rated 5 out of 5 by RatWagon1 from Lays down amazing! Title says it all, this stuff lays down super smooth like butter. The finish when dry is perfect amount of flat to gloss and very black not grayish ike some flat flat blacks tend to be. Awesome stuff.

Date published: 2016-02-15

Rated 5 out of 5 by 1966 ss from 2k aerospray ceramic it covers as advertised looks like the factory paint

Date published: 2015-11-16

Eastwood 2K Ceramic Aerosol Underhood Black Reviews - page 2

I have already used the regular underhood black and now that there is a 2K version would like to repaint some areas under the hood but not all. Will the two paints react with each other and will they match being two different types of paint.

Asked by: Slim71

When it comes to the paints matching they are certainly designed to be the same gloss level. Being a catalyzed paint vs non catalyzed and spray technique can change the gloss level slightly. When it comes to applying this Catalyzed paint over top, we have never tested in such a manor to guarantee there would be no reaction. We recommend sticking with the paint you have already used for these reasons.

Answered by: Scott C

Date published: 2018-06-11

Two questions. How many cans are necessary for the average under-hood area (firewall and inner fenders)? And, if at some point somebody sprayed a non-catalyzed paint in this engine compartment (not sure how I would know), will this paint react with it?

Asked by: crazycasey

Since each can will cover approximately 10 SQ FT it would most likely take 3 cans. As for going over Non-catalyzed paint it would be impossible to say 100% if it will or will not react. Since it is long dry it will minimize and chance of reaction and you can take it one step further by putting the first coat or 2 on light minimize the solvents hitting the old paint.

Answered by: Scott C

Date published: 2018-05-24

Is this resistant to brake fluid?

Asked by: Machm1970

Since this is a catalyzed product it will be the most chemical resistant chassis paint.

Answered by: Scott C

Date published: 2018-02-01

Looking to paint my firewall and inner fenders. Can your 2K high gloss clear be used over this? and will the 2K clear give this black a glossy finish

Asked by: RobbieL

You can clear over this paint, however we have never tested to see the exact outcome. If you are looking for a glossy finish in the same durable catalyzed finish we recommend looking at our Gloss Ceramic Chassis Black.

Answered by: S Church

Date published: 2017-09-13

How long will it last in the can after it is mixed?

Asked by: lizzard

At 70F the pot life on this can will be about 48 hours.

Answered by: S Church

Date published: 2017-02-08

Can you spray this over Eastwoods self etching primer?

Asked by: The Judge

This product can certainly be applied over our self etching primer.

Answered by: S Church

Date published: 2017-02-08

I need to order more so I will have at least a week between coats. Will I need to sand the surface with 320 before applying a second coat? The spec sheet is not clear. Thanks. 

Asked by: 1275GT

At that point, it will be fully cured. You would want to abrade the surface with a red or maroon scotch brite before applying another coat .

Answered by: KHoffnagle

Date published: 2017-02-08

Is primer necessary over aluminum?

Asked by: Jeremy73

You would still want to use an Epoxy or self etch for good surface adhesion before this paint.

Answered by: S Church

Date published: 2017-02-08

Eastwood 2K Ceramic Aerosol Underhood Black Questions - page 2

Eastwood 2K Ceramic Aerosol Underhood Black

Item #14147Z Brand: Eastwood

Durability and precision of a 2-component coating, without the paint gun

Qty:

Quantity:

In stock

Only $22.99

Add to Wishlist

Details

Eastwood's 2K Ceramic Underhood Black Aerosol allows you to paint with the durability and precision of a two component coating without the paint gun!

2-Component Nano-Ceramic Technology
Two Chamber Design Aerosol
Most Durable Aerosol Paint Available
Sprays Like a Paint Gun

Formulated with Eastwood's proprietary nano ceramic technology to provide a long lasting and durable finish, while keeping its beautiful finish for years. The innovative nozzle and valve technology, combined with its two internal chambers ensure the right ratio is mixed every time. Sprays like a gun with a broader spray pattern than conventional aerosols and no mess to clean up. You'll achieve professional results from an aerosol.

More info...

12 Ounces net weight

Safety

always wear eye, skin and respiratory protection when using this product. Product contains Isocyanates, wear NIOSH approved breathing equipment. Always use in a well ventilated area away from open flame. Consult MSDS for specific safety warnings

Warranty

Made in Germany using Eastwood's Nano ceramic technology. 60 day warranty, 2 year shelf life. 48 hour pot life after activation.

Application

Before activating, shake aerosol vigorously for 2 min. Take red button from cap. Turn aerosol by 180Â° and attach button to pin on aerosol bottom. Place aerosol on firm ground upside down. Press red button with the ball of your hand until stop is reached.After activating, shake aerosol again vigorously for 2 min. Pot life is 48 up to 72 hours at 68 degrees F.