close
Find Anything, Fast!

Need Support or Have a Question?

Click Here
Free Shipping Eastwood 40th Anniversary Sale
  • Home
  • Eastwood Carb Renew 2 Bronze Aerosol 5 OZ
Eastwood Carb Renew 2 Bronze Aerosol 5 OZ is rated 4.1 out of 5 by 42.
Rated 5 out of 5 by from Great product — SMALL CAN! Used this on the Zenith 40 TIM carbs for my Porsche 911 and the color absolutely looks great applied as a light dusting over the carb body for a bronze look or heavier coverage on small parts & fixtures for a more gold-ish look. For those wondering this paint does NOT give a look of yellow zinc plating or cad plating but does provide a nice satin bronze color as advertised. Be aware the can is MUCH SMALLER than a typical can of spray paint and if you have a Porsche, VW, Corvair, or other car with multiple carbs you will most likely need a couple of cans.
Date published: 2018-06-10
Rated 5 out of 5 by from Good finish. I bought a couple cans to paint my Rochester 2GCs for my tripower restoration. Followed directions diligently for the pre paint prep work and so far has held up well and that has been 3 years now. There are a couple spots on one carb where the float stuck and overflowed fuel where the paint is a little thin now but not too noticable. If I'd used the clear coat would probably held up to it.
Date published: 2018-04-19
Rated 5 out of 5 by from Durable finish I bought this to refinish some 2GC's I rebuilt. Although it is a little "fakey" looking, I really like it. The bottom line on the carburetor's appearance is that they look very nice, and only a "car guy" could discern that it is not 100% correct. The part I like best is that it is very durable (at least when "overcoated" with Eastwood's "Satin Clear"). I cleaned mine with carburetor cleaner and then ran the housings through the dishwasher(!??!). After that I bead-blasted them, so I know the surface was squeaky clean. I applied one coat of this, followed the next day by two coats of the aforementioned "Satin Clear". One of the units I was working on was one that I assembled from a bunch of leftover parts to make a complete unit. I had a heck of a time getting the right linkage pieces back in the right places. Over the course of a couple of days, I disassembled it a couple of times and handled it quite a bit. When I finally got it back together, it still looked as good as when I first put it together. I guess this is just like any other paint job : the key is the preparation.
Date published: 2018-01-27
  • y_2018, m_8, d_14, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_42
  • loc_en_US, sid_12867Z, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Do you need A primer of any kind . After about 10 months it seems to be wearing off my 97s and I have to keep painting them.

Asked by: Guasco
Carb Renew does not require a primer. This product is actually translucent and is intended to have some of the brightwork from the carb show through to properly depict the bronze color. Wire brushing the carb body to shine it up before application is recommended to get this appearance. For added durability, topcoating with 2K AeroSpray gloss or matte clear is something that can be done.
Answered by: NickC
Date published: 2018-05-25
  • y_2018, m_8, d_14, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_12867Z, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_eastwood

Eastwood Carb Renew 2 Bronze Aerosol 5 OZ

Eastwood Carb Renew 2 Bronze Aerosol 5 OZ

Item #12867Z

Restore the OEM bronze look
found on just about any carburetor
Quantity:
Quantity: close

In stock

Only $12.99
< Back

Details

Carb Renew2 restores that original bronze look found on most carburetors

  • Natural 3-8% gloss matches OEM bronze
  • Heat-resistant to 300 degrees F
  • Aerosol can covers about 2 sq. ft.

Newly reformulated Carb Renew 2 restores the OEM factory bronze appearance of most carburetors, and has improved fuel resistance and durability compared to our original formula.


More info...
< Back

About Eastwood Carb Renew 2 Bronze Aerosol 5 OZ

Newly reformulated Carb Renew2 has improved fuel resistance and durability compared to our original formula, and still restores the OEM factory bronze appearance found on most carburetors. Carb Renew2 is a translucent acrylic enamel that is resistant to fuel and most additives, and withstands up to 300 degreesF. Produces a natural 3-8% gloss. Carb Renew2 comes in a 5-oz. aerosol, enough to cover about 2 sq. ft.


Contents

5-oz. Carb Renew2 aerosol


Accessories

16071Z Eastwood Carburetor Cleaner
10032Z Spray Gray
10109Z Aluma Blast
10280 Clear Zinc
10022Z Silver Cad


Application

Since Carb Renew2 is translucent, it's very important to thoroughly clean the surface and bring the base metal to a uniform look. While your carburetor is apart and all jets are removed, simply spray Carb Renew2 on the exterior of the thoroughly cleaned bowl cover and main body. Apply in very light coats to replicate original plating.


Safety

Please read and follow label instructions carefully. Always wear eye, skin and respiratory protection, and use in a well-ventilated area. Consult the MSDS for specific warnings and precautions.


MSDS

Click Here for Material Safety Data Sheet


< Back

Customer Reviews

< Back

Questions & Answers

Customers also viewed: